Xerox DocuCentre-III C4100 Manual page 425

Category
Error Code
C P F S M O
116-714
O
116-720
O
116-725
116-740 O
116-747
O
116-748
O
116-749 O
116-750
116-752
O
116-771
O
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-780
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
[Cause] An HP-GL/2 command error occurred.
[Remedy] Check the print data.
[Cause] An error occurred during print processing due to
insufficient memory.
[Remedy] Stop unnecessary ports or remove unnecessary data from
the hard disk, to increase free disk space.
O [Cause] Unable to write the image log because the image log save
space is insufficient on the machine.
[Remedy] Execute the job again.
If this error persists, take one of the following actions:
Delete unnecessary image logs.
Change the [Assurance Level] setting for image logs to
[Low]. Note that selecting [Low] will not secure the
contents of created image logs.
[Cause] Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
[Remedy] Check the print data.
[Cause] The paper margin value is too large for the HP-GL/2
effective coordinate area.
[Remedy] Decrease the paper margin value, and try again.
[Cause] There is no plot data in the HP-GL/2 print data.
[Remedy] Check the print data.
[Cause] The job was cancelled because the specified font does not
exist.
[Remedy] Install the font, or set the font replacement on the print
driver.
O [Cause] Banner sheet tray malfunction
[Remedy] Get the tray back to normal or change the Banner sheet
tray.
[Cause] The descriptions of the PDF printing job ticket have a
problem.
[Remedy] Try again. If the problem persists, contact our Customer
Support Center.
[Cause] The data was automatically modified because it included
an invalid parameter.
[Remedy] The printed image may be incomplete. Check if the image
has no problem, or ask the sender to send the data again.
When using the Internet Fax forwarding feature, check the
data sent to the e-mail recipient.
O O [Cause] There is a problem with the document attached to the
received e-mail.
[Remedy] Check the attached document.
Cause and Remedy
Error Code
14
423