Using The Key Operator System - Oce 31x5E Configuration And Maintenance Manual

Using the key operator system

The key operator system can be accessed in two ways: via the Océ 31x5E
operating panel or from a PC with Print Logic. This gives the person-in-charge
flexibility in managing and maintaining the Océ 31x5E.
In the key operator system, as in the usual copy environment, all functions are
divided into 4 sections, and are accessible with the section buttons. Each
section consists of a number of subsections. Each subsection in turn consists
of a card with related functions.
function button or
card selection button
[4] Navigation buttons in the key operator system
Both functions and subsections can be selected by means of the card selection
button. When you use the arrow buttons to select a setting for a function, you
will see that the list of subsections will be dimmed and non-selectable.
In order to scroll to another subsection, you must first press the card selection
button to activate the list again. You can then press this button repeatedly to go
to the required subsection.
Introduction
section buttons
function buttons
arrow
buttons
17