Table of Contents
Advertisement
The service technician will have defined whether the copier
Test for credit
tests for sufficient credit before producing a copy. The availability of this
option depends on the type of device being used (not all devices have a credit
test option). For example, if no testing is carried out and there is only one credit
unit left, the credit is used before the copier discovers that the job requires 2
credit units (which is applicable to double-sided copies and/or A3 copies, as
determined by the key operator). A test is carried out, no copy will be
produced. The user can then add another credit unit, or use the credit already
deducted to make another copy.
[29] Copy charge device
(De)activating the copy charge device
Access the key operator system (see page 14).
1
Open the 'Accounting' section and select 'Copy charges' (see figure 29).
2
Press the 'Copy charge device' function button to select 'On' or 'Off'.
3
When ready, exit the key operator system.
4
Configuration management
45
Advertisement
Table of Contents
