Table of Contents
Advertisement
Enabling export for scanning (optional)
To enable or disable users to transfer scan files from the Océ 31x5E to the
server, you can enable export or not. You may need this e.g. in case of
maintaining or servicing the DAC (by disabling export, users at the Océ 31x5E
can create a queue of scanned jobs at the DAC.).
[31] Export enabled
To Enable export or not.
Access the key operator system (see page 14).
1
Select the Scanning tab.
2
Click 'Enable export'
3
Click 'Apply'.
4
When ready, close the key operator system.
5
Repeat the same steps to turn it off again.
Note:
Configuration management
47
Advertisement
Table of Contents
