Turning the DAC on and off
The DAC is turned on with the on/off switch. To turn the DAC off, you must
use the operating panel.
The on/off button should only be used to turn the DAC on.
Note:
Before you can turn off the DAC, you must first stop any running processes. If
the Network Copier is printing, it will stop as soon as the current job has been
finished. Do this by stopping the DAC. Jobs which are still waiting in the queue
will be stored and finished when the DAC is turned on again.
Stopping the DAC at the operating panel
Accessing the key operator system (see page 14).
1
Open the 'Printing' section and select 'DAC control'.
2
[6] 'Stop DAC' function
Press the 'Stop DAC' function button.
3
Press start (
4
[7] DAC is stopped, printing is no longer possible
22
Océ 31x5E Configuration and special maintenance
) to confirm.