Table of Contents
Advertisement
Unlatch the stapler cover by loosening the screw with a coin or a screwdriver
4
(action 1 in figure 74). Once the screw is loosened, you can slide the latch to
the rear.
[74] Unlatching and opening the stapler
Open the stapler by pulling the lever to the left and then lifting it (see action 2
5
in figure 74).
Remove the empty staple cartridge by pulling it up (see figure 75).
6
[75] Removing the staple cartridge
Remove any remaining staples from the stapler anvil.
7
Place a new cartridge by pushing it downward until it clicks into place. Make
8
sure that the first strip of staples does not slide out of the staple cartridge.
Close the stapler and pull the lever to the left until it is closed and lock the
9
screw.
Close the top cover.
10
Slide the frame to the left until it locks into place.
11
Close the paper compartment door.
12
96
Océ 31x5E Configuration and special maintenance
1
2
latch
Advertisement
Table of Contents
