Table of Contents
Advertisement
Remove the empty staple cartridge by turning it over to the left in a single
6
movement (see action 1 in figure 70).
[70] Removing/replacing the staple cartridge
Remove any remaining staples from the stapler anvil.
7
Insert a new cartridge by sliding it downward to the left until it clicks into place
8
(action 2 in figure 70 above). Make sure that the first strip of staples does not
slide out of the staple cartridge.
Close the stapler and lock it by means of the latch and the screw.
9
Close the top cover.
10
Slide the frame to the left until it locks.
11
Close the door to the paper compartment.
12
Slide some sheets of paper into the stapling slot, as shown in figure 71.
13
[71] Manual stapling
This action will make the strip of staples move a bit towards the mouth of the
stapler.
Repeat the manual stapling 4 to 6 times, until a staple is inserted through the
14
paper. The stapler is now ready for operation.
94
Océ 31x5E Configuration and special maintenance
2
1
Advertisement
Table of Contents
