Enter the PIN code using the copy quantity buttons.
4
After a few seconds (if the PIN code you entered is correct), the key operator
system will be available to you.
[2] Key operator system
Quitting the key operator system using the operating panel
Open the 'Basic' section and press the 'Quit key operator system'function
1
button.
Press start (
) to confirm.
2
Any changes you have made in the key operator system will now be active.
Accessing the key operator system using Print Logic
Click the Windows start button and choose Océ Print Logic from the Programs
1
menu.
Select 'Available printers'.
2
Select a printer and open 'Tools' in the menu bar.
3
Select 'Key operator system'.
4
The key operator system can also be accessed directly from the
Note:
Programs menu. Select the printer in the list of printers and click 'OK'.
Introduction
15