Restoring network settings
If the network administrator has accidentally changed and applied some wrong
network settings, the Network Copier may become disconnected. The DAC
still has the former network settings in its memory. Therefore, it is possible to
restore these network settings from the operating panel.
[93] 'Network settings'
Restoring the network settings
Access the key operator mode (see 'Accessing the key operator system using
1
the operating panel' on page 14).
Open the 'Printing' section and select 'DAC control'.
2
Press the 'Network settings' function button.
3
Press 'Start' (
4
Exit the key operator mode.
5
Error handling
) to confirm.
113