Page 1 Océ cm3522/ cm2522 Printing for Professionals User’s Guide Network Administrator...
Page 2 Introduction Thank you for purchasing this machine. This User’s Guide describes setting methods for each function utilizing Océ cm3522/cm2522, mainly using the Web Connection. In order to allow functionality of this product fully and to use it effectively, please read through this User’s Guide, and then get started.
Page 3: Table Of Contents
Sending scan data by E-mail ......................1-23 1.9.1 TCP/IP Settings ............................1-23 1.9.2 E-mail TX (SMTP)............................1-24 E-mail TX (SMTP)............................1-24 Admin. E-mail Address ...........................1-25 1.9.3 SMTP over SSL/Start TLS ........................1-26 E-mail TX (SMTP)............................1-26 Action for Invalid Certificate ........................1-26 1.9.4 SMTP Authentication..........................1-27 Océ cm3522/cm2522...
Page 4 Device Mail Address ..........................1-47 Machine Setting............................1-48 1.15.4 Header Information ..........................1-49 1.15.5 E-mail TX (SMTP)............................1-50 1.15.6 I-Fax Advanced Setting ..........................1-50 1.15.7 SMTP over SSL/Start TLS ........................1-50 1.15.8 SMTP Authentication..........................1-51 1.15.9 POP before SMTP ..........................1-51 1.15.10 POP over SSL............................1-51 1.15.11 APOP Authentication ..........................1-51 Océ cm3522/cm2522...
Page 5 For NetWare 4.x Remote Printer mode (NDS) ..................1-74 For NetWare 4.x/5.x/6 Print Server mode (NDS) ..................1-75 For NetWare 5.x/6 Novell Distributed Print Service (NDPS)..............1-75 1.26.2 NetWare Status ............................1-76 1.27 Using the WS-Print function ......................1-77 1.27.1 TCP/IP Settings ............................1-77 1.27.2 Web Service Common Settings ......................1-78 Océ cm3522/cm2522...
Page 6 User Auth/Account Track ........................1-106 1.36.4 Default Function Permission.........................1-107 1.36.5 Date/Time Setting ..........................1-107 1.37 Limiting users using this machine (Windows domain/workgroup)..........1-108 1.37.1 TCP/IP Settings ............................1-108 1.37.2 External Server Registration .........................1-109 1.37.3 User Auth/Account Track ........................1-110 1.37.4 Default Function Permission.........................1-110 Océ cm3522/cm2522...
Page 7 ROM Version............................1-139 1.45 Other items on the Security tab ...................... 1-140 1.45.1 Limiting accessible destinations by user....................1-140 Reference Allowed Group Registration ....................1-140 Public User Reference Setting......................1-141 1.45.2 Restricting address registration by a user....................1-141 Permission of Address Change ......................1-141 Océ cm3522/cm2522...
Page 8 Displaying the Network Settings screen .................... 2-2 Network Settings menu list ......................... 2-4 2.2.1 Network Settings screen (1/2) ........................2-4 2.2.2 Network Settings screen (2/2) ........................2-14 Appendix Product Specifications (Network functions) ..................3-2 Glossary..............................3-3 Index Index ..............................4-2 Océ cm3522/cm2522...
Page 9: About This Manual
This manual consists of the following chapters: Chapter 1 Setup items by operation Chapter 2 Network Settings Chapter 3 Appendix Chapter 4 Index Representation of product name Product name Representation Océ cm3522/cm2522 Machine, copier, or printer Microsoft Windows Windows Océ cm3522/cm2522...
Page 10: Explanation Of Manual Conventions
Explanation of manual conventions Océ cm3522/cm2522...
Page 11 Océ cm3522/cm2522 x-10...
Page 12: User's Guides
This manual contains descriptions on setting methods for each function utilizing network connection, mainly using the Web Connection. Refer to this manual for details on using network functions. Trademarks/Copyrights This manual contains descriptions on trademarks and copyrights. Be sure to read this manual before using the machine Océ cm3522/cm2522 x-11...
Page 13 Océ cm3522/cm2522 x-12...
Page 14: Setup Items By Operation
Setup items by operation...
Page 15: Specifying General Settings For Tcp/Ip-Based Communication
To automatically register the host name specified with [DNS Whether Dynamic DNS is Host Name] for the DNS server that supports the Dynamic used DNS function, select [Enable]. DNS Host Name Specify the host name of this machine (up to 63 characters). Océ cm3522/cm2522...
Page 16: Device Setting
On the Administrator Settings screen of the control panel, select [Network Settings] - [5 Detail Settings] - [1 Device Setting]. Specify the following settings. Item Definition Prior confirmation MAC Address Displays the MAC address of the network interface card for this machine. Network Speed Specify the network speed. Océ cm3522/cm2522...
Page 17: Using Web Connection
On the Administrator Settings screen of the control panel, select [Network Settings] - [3 HTTP Server Settings]. Specify the following setting. Note For details on displaying the Network Setting screen, refer to "Displaying the Network Settings screen" on page 2-2. Item Definition Prior confirmation Web Settings Select [ON]. Océ cm3522/cm2522...
Page 18: Tcp Socket Setting
To use in the Flash format, select the "TCP Socket (ASCII (ASCII Mode) Mode)" check box. Port No. Specify the port number. (ASCII Mode) 1.2.4 SSL/TLS Setting Specifying settings for SSL-based communication For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 1-7. Océ cm3522/cm2522...
Page 19: Logging In To Administrator Mode Of Web Connection
If "Prohibited Functions When Authentication Error" in Administrator mode is set to "Mode 2" and an incorrect password is entered the specified number of times, it is no longer possible to log in to Administrator mode. For details on the "Prohibited Functions When Authentication Failed" parameter, refer to the User’s Guide [Copy Operations]. Océ cm3522/cm2522...
Page 20: Creating A Certificate For This Machine For Ssl-Based Communication
SSL. For details, refer to the respective sections. "Using Web Connection" on page 1-4 "Printing (IPPS)" on page 1-69 "Using SSL for communication from Vista to this machine with Web Service" on page 1-83 "Using the TCP Socket/OpenAPI/FTP server function" on page 1-127 Océ cm3522/cm2522...
Page 21: Create A Self-Signed Certificate
Enter the number of days from the starting date for the peri- od of validity for the certificate. Encryption Strength Specify the encryption method. Mode using SSL/TLS Specify the mode using SSL/TLS. [OK] Creates a self-signed certificate. It may take a few minutes to create a certificate. Océ cm3522/cm2522...
Page 22: Request A Certificate
CZ, China: CN, Denmark: DK, Germany: DE, Japan: JP, France: FR, Belgium: BE, Russia: RU Admin. E-mail Address Specify the address for the administrator (up to 127 charac- Address for the adminis- ters). trator [OK] Creates certificate signing request data. Océ cm3522/cm2522...
Page 23: Install A Certificate
After requesting a certificate to the certification authority, install the certificate sent from the certification authority on this machine. Item Definition Prior confirmation Install a Certificate Paste text data sent from the certification authority. [OK] Moves to the Set an Encryption Strength and Set Mode us- ing SSL screen. Océ cm3522/cm2522 1-10...
Page 24: Set An Encryption Strength
In Administrator mode of Web Connection, select the Security tab - "SSL/TLS Setting" -" SSL / TLS Setting" - [Setup] - "Set an Encryption Strength". Specify the following setting. Item Definition Prior confirmation Encryption Strength If necessary, change the set encryption strength. Specify the encryption strength. Océ cm3522/cm2522 1-11...
Page 25: Set Mode Using Ssl
In Administrator mode of Web Connection, select the Security tab - "SSL/TLS Setting" - "SSL / TLS Setting" - [Setup] - "Remove a Certificate". If necessary, remove the certificate installed on this machine. To remove the installed certificate, click [OK]. Detail If Enhanced Security Mode is set to "ON", the certificate cannot be removed. Océ cm3522/cm2522 1-12...
Page 26: Acquiring The Certificate For This Machine
"Creating a certificate for this machine for SSL-based communication" on page 1-7. 1.5.2 Download a certificate In Administrator mode of Web Connection, select the Security tab - "SSL/TLS Setting"- [Setup] - "Certificate Download". To download a certificate to the computer, click [Download]. Océ cm3522/cm2522 1-13...
Page 27: Registering A User Certificate In This Machine
Manual registration Auto registration E-mail Address Automatically Obtain Certificates Finish 1.6.1 E-mail Address In Administrator mode of Web Connection, select the Store Address tab - "Address Book" - [New Registration] - "Address Book (E-mail)". Specify the following setting. Océ cm3522/cm2522 1-14...
Page 28: Automatically Obtain Certificates
Address Book. After registering the E-mail address, send the message with a digital signature attached from the computer on the network to this machine. If the E-mail address registered in this machine matches the E-mail address of the received certificate, the certificate is automatically registered. Océ cm3522/cm2522 1-15...
Page 29: Specifying The Date And Time On This Machine
"Searching for E-mail addresses from the LDAP server" on page 1-35 "Limiting users using this machine (Active Directory)" on page 1-104 1.7.1 Manual Setting In Administrator mode of Web Connection, select the Maintenance tab - "Date/Time Setting" - "Manual Setting". Specify the following settings. Océ cm3522/cm2522 1-16...
Page 30: Tcp/Ip Settings
Specify the NTP server address. (Format: "***.***.***.***", Address of the server Range for ***: 0 to 255) If the DNS server is specified, the address can be specified using the host name. This item can also be specified with IPv6. Océ cm3522/cm2522 1-17...
Page 31 Setup items by operation Item Definition Prior confirmation Port Number Default setting: 123 Port number for the serv- Specify the port number. [Adjust] Connects to the NTP server with the specified conditions to adjust the time. Océ cm3522/cm2522 1-18...
Page 32: Sending Scan Data To A Windows Computer
To send data in the IPv6 environment, the Direct Hosting setting must be enabled. To specify the destination computer with the computer (host) name, prepare a DNS server and be sure to specify the DNS settings of this machine correctly. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-19...
Page 33: Client Setting
SMB TX Setting Select "ON". NTLM Setting Specify the NTLM version. Destination OS To perform SMB TX to Mac OSX, Samba (Linux/Unix), spec- ify "v1". To perform SMB TX to Windows 98SE/Windows Me, specify "v1/v2" or "v1". Océ cm3522/cm2522 1-20...
Page 34: Direct Hosting Setting
Specify the following setting. Item Definition Prior confirmation Direct Hosting Setting To use the direct hosting service, select "ON". Whether the IPv6 envi- To communicate with the destination using an IPv6 address, ronment is available select "ON". Océ cm3522/cm2522 1-21...
Page 35: Wins Setting
B Node: Query by broadcast • P Node: Query to WINS server • M Node: Query in the order of broadcast, then WINS server • H Node: Query in the order of WINS server, then broad- cast Océ cm3522/cm2522 1-22...
Page 36: Sending Scan Data By E-Mail
For details on the E-mail-based file transmission, refer to the User’s Guide [Network Scan/Fax/Network Fax Operations]. 1.9.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-23...
Page 37: E-Mail Tx (Smtp)
Mails exceeding the maximum allowance are removed. If a mail is separated, this setting is disabled. Admin. E-mail Address The administrator address specified in "Machine Setting" in the Maintenance tab in Administrator mode of Web Connec- tion is displayed. Océ cm3522/cm2522 1-24...
Page 38: E-Mail Tx (Smtp)
Detail If "Change the From Address" is set to "Restrict", the From address cannot be changed when sending an E-Mail message. For details, refer to the User’s Guide [Network Scan/Fax/Network Fax Operations]. Océ cm3522/cm2522 1-25...
Page 39: Smtp Over Ssl/Start Tls
If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid. Océ cm3522/cm2522 1-26...
Page 40 If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent. Océ cm3522/cm2522 1-27...
Page 41 Specify the password for logging in to the POP server (up to 15 characters). Connection Timeout Specify the time period before the server connection times out. Port Number Default setting: 110 Port number for the serv- Specify the port number. Océ cm3522/cm2522 1-28...
Page 42 If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid. Océ cm3522/cm2522 1-29...
Page 43: Apop Authentication
When the POP server is logged in with APOP, the password is encrypted with Digest-MD5. If "ON" is specified for APOP authentication, you cannot log in to the server if the POP server does not support APOP. Océ cm3522/cm2522 1-30...
Page 44: E-Mail Tx (Smtp)
Specify settings for sending messages. For details, refer to "E-mail TX (SMTP)" on page 1-24. 1.10.3 Create a certificate Create a certificate for this machine. For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 1-7. Océ cm3522/cm2522 1-31...
Page 45: S/Mime
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.10.9 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-32...
Page 46: Sending Scan Data By E-Mail (Public Key-Based Encryption)
Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. 1.11.2 E-mail TX (SMTP) Specify settings for sending messages. For details, refer to "E-mail TX (SMTP)" on page 1-24. Océ cm3522/cm2522 1-33...
Page 47: S/Mime
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.11.8 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-34...
Page 48: Searching For E-Mail Addresses From The Ldap Server
On the Administrator Settings screen of the control panel, select [Security Settings] - [4 Security Details] - [Manual Destination Input]. Specify the following settings. Note For details on displaying the Network Setting screen, refer to "Displaying the Network Settings screen" on page 2-2. Océ cm3522/cm2522 1-35...
Page 49: Ldap Setting
Prior confirmation Manual Destination Input Select [Allow]. 1.12.3 LDAP Setting In Administrator mode of Web Connection, select the Network tab - "LDAP Setting" - "LDAP Setting". Specify the following setting. Item Definition Prior confirmation Enabling LDAP Select "ON". Océ cm3522/cm2522 1-36...
Page 50: Setting Up Ldap
Timeout Specify the maximum wait time for a search operation. Max. Search Results Specify the maximum number of destinations to be dis- played after a search. Océ cm3522/cm2522 1-37...
Page 51: Ldap Over Ssl
To encrypt communication between this machine and the Whether the sever sup- LDAP server using SSL, select the "Enable SSL" check box. ports SSL Port Number (SSL) Default setting: 636 Port number for the serv- Specify the port number used in SSL communication. Océ cm3522/cm2522 1-38...
Page 52: Action For Invalid Certificate
"Specifying general settings for TCP/IP-based communication" on page 1-2. 1.12.7 Date/Time Setting When using Active Directory, specify the date and time on this machine. For details, refer to "Specifying the date and time on this machine" on page 1-16. Océ cm3522/cm2522 1-39...
Page 53: Sending Scan Data By Ftp
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. 1.13.2 FTP TX Setting In Administrator mode of Web Connection, select the Network tab - "FTP Setting" - "FTP TX Settings". Specify the following settings. Océ cm3522/cm2522 1-40...
Page 54 Proxy Server Port Specify the port number. Port number for the serv- Number Connection Timeout Specify the time period before the server connection times out. Port Number Default setting: 21 Port number for the serv- Specify the port number. Océ cm3522/cm2522 1-41...
Page 55: Sending Scan Data By Webdav
Whether or not to send using SSL encryption is specified at address registration. For details, refer to "Address Book" on page 1-153. 1.14.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-42...
Page 56: Webdav Settings
Specify the user name for the proxy server (up to 63 charac- ters). Password Specify the password for the proxy server (up to 63 charac- ters). Connection Timeout Specify the time period before the server connection times out. Océ cm3522/cm2522 1-43...
Page 57: Webdav Over Ssl
If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid. Océ cm3522/cm2522 1-44...
Page 58: Sending An Internet Fax
For details on the Internet fax operation, refer to the User’s Guide [Network Scan/Fax/Network Fax Operations]. 1.15.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-45...
Page 59: Internet Fax Function
- [1 Network Fax Function Setting]. Specify the following setting. Note For details on displaying the Network Setting screen, refer to "Displaying the Network Settings screen" on page 2-2. Item Definition Prior confirmation Internet Fax Function Select [ON]. Océ cm3522/cm2522 1-46...
Page 60: Regist Machine Information
Specify the following setting. Item Definition Prior confirmation Device Mail Address Specify the address for the device (up to 320 characters). Address for the device If no address is specified here, the Internet fax cannot be sent. Océ cm3522/cm2522 1-47...
Page 61: Machine Setting
In Administrator mode of Web Connection, select the Maintenance tab - "Machine Setting". Specify the following setting. Item Definition Prior confirmation Device Name Specify the device name (up to 255 characters). This name is contained in the subject of the Internet fax. Océ cm3522/cm2522 1-48...
Page 62: Header Information
Sender Name Displays registered sender names. [Edit] Registers or edits the sender name. [Delete] Deletes the registered sender name. Registration Item Definition Prior confirmation Displays the registration number. Sender Name Enter the sender name (up to 30 characters). Océ cm3522/cm2522 1-49...
Page 63: E-Mail Tx (Smtp)
MDN or DSN response of which set waiting time was up is ignored. Maximum Resolution Specify the maximum resolution. 1.15.7 SMTP over SSL/Start TLS Specify the settings for SMTP over SSL/Start TLS. For details, refer to "SMTP over SSL/Start TLS" on page 1-25. Océ cm3522/cm2522 1-50...
Page 64: Smtp Authentication
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.15.11 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-51...
Page 65: Apop Authentication
Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. 1.16.2 Internet Fax Function Enable the Internet fax function of this machine. For details, refer to "Internet Fax Function" on page 1-46. Océ cm3522/cm2522 1-52...
Page 66: E-Mail Rx (Pop)
New Messages" check box. Polling Interval To automatically receive messages, specify an interval for receive messages automatically. Detail By touching [Receive I-Fax] on the Fax/Scan mode screen of the control panel, E-mail messages can be manually received. Océ cm3522/cm2522 1-53...
Page 67: I-Fax Advance Setting
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.16.6 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-54...
Page 68: Receiving Internet Faxes Encrypted With The Public Keys Of This Machine
For details on acquiring a certificate for this machine, refer to "Acquiring the certificate for this machine" on page 1-13. 1.17.1 Receive Internet faxes Specify settings for receiving Internet faxes. For details, refer to "Receiving Internet faxes" on page 1-52. Océ cm3522/cm2522 1-55...
Page 69: S/Mime
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.17.4 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-56...
Page 70: Sending And Receiving Ip Address Faxes
On the Administrator Settings screen of the control panel, select [Network Settings] - [2 Network Fax Setting] - [1 Network Fax Function Setting]. Specify the following setting. Note For details on displaying the Network Setting screen, refer to "Displaying the Network Settings screen" on page 2-2. Océ cm3522/cm2522 1-57...
Page 71: Smtp Tx Setting
In Administrator mode of Web Connection, select the Network tab - "Network Fax Setting" - "SMTP TX Setting". Specify the following settings. Item Definition Prior confirmation Port Number Default setting: 25 Port number to be used Specify the port number. Connection Timeout Specify the time period before the server connection times out. Océ cm3522/cm2522 1-58...
Page 72: Smtp Rx Setting
Port number to be used Specify the port number. Connection Timeout Specify the time period before the server connection times out. 1.18.5 Header Information Register sender information for fax transmissions. For details, refer to "Header Information" on page 1-49. Océ cm3522/cm2522 1-59...
Page 73: Importing Images Using The Twain Scan
1-2. 1.19.2 SLP Setting In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP Setting". Specify the following setting. Item Definition Prior confirmation To search for this machine using TWAIN, select "Enable". Océ cm3522/cm2522 1-60...
Page 74: Tcp Socket Setting
TCP Socket Setting In Administrator mode of Web Connection, select the Network tab - "TCP Socket Setting". Specify the following settings. Item Definition Prior confirmation TCP Socket Select the "TCP Socket" check box. Port Number Specify the port number. Océ cm3522/cm2522 1-61...
Page 75: Network Twain
Setup items by operation 1.19.4 Network TWAIN In Administrator mode of Web Connection, select the Maintenance tab - "Network TWAIN". Specify the following setting. Item Definition Prior confirmation TWAIN Lock Time Specify the control panel lock time during TWAIN scan. Océ cm3522/cm2522 1-62...
Page 76: Printing (Lpr/Port9100)
In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP Setting". Specify the following setting. Item Definition Prior confirmation RAW Port Number Select the check box for the port to be used, and then spec- ify the RAW port number. Océ cm3522/cm2522 1-63...
Page 77: Printing (Smb)
For details on installing the printer driver, refer to the User’s Guide [Print Operations]. 1.21.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-64...
Page 78: Print Setting
To perform SMB print via the router, specify settings for the WINS server. For details, refer to "WINS Setting" on page 1-22. 1.21.4 Direct Hosting Setting To execute SMB print in the IPv6 environment, enable the Direct Hosting setting. For details, refer to "Direct Hosting Setting" on page 1-21. Océ cm3522/cm2522 1-65...
Page 79: Printing (Ipp)
For details on installing the printer driver, refer to the User’s Guide [Print Operations]. 1.22.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-66...
Page 80: Ipp Setting
Specify the printer location (up to 127 characters). Printer Information Specify the printer information (up to 127 characters). Printer URI Displays the URI of the printer that can use IPP when print- ing. Support Operation Specify the print operations supported by IPP. Océ cm3522/cm2522 1-67...
Page 81: Ipp Authentication Setting
User Name Specify the user name (up to 20 characters). Password Enter the password (up to 20 characters). realm Specify realm (up to 127 characters). Authentication method If the authentication method is digest, realm must be speci- fied. Océ cm3522/cm2522 1-68...
Page 82: Printing (Ipps)
Specify settings for printing by using IPP. For details, refer to "IPP Setting" on page 1-67. 1.23.3 SSL/TLS Setting Encrypt communication with this machine using SSL. For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 1-7. Océ cm3522/cm2522 1-69...
Page 83: Ipp Authentication Setting
Setup items by operation 1.23.4 IPP Authentication Setting Specify settings when authentication is used when printing using IPP. For details, refer to "IPP Authentication Setting" on page 1-68. Océ cm3522/cm2522 1-70...
Page 84: Printing (Bonjour)
In Administrator mode of Web Connection, select the Network tab - "Bonjour Setting". Specify the following settings. Item Definition Prior confirmation Bonjour Select "ON". Bonjour Name Specify the Bonjour name that appears as the name of the connected device (up to 63 characters). Océ cm3522/cm2522 1-71...
Page 85: Printing (Appletalk)
Printer Name* Specify the printer name that appears on the selector (up to 31 characters). Zone Name* Specify the zone name to which this machine belongs (up to 31 characters). Current Zone Displays the current zone name. Océ cm3522/cm2522 1-72...
Page 86: Printing (Netware)
Enter the appropriate names in the "Print Server Name", "Printer Name", and "Print Queue Name" fields, select "Other/Unknown" from the "Printer type" field, and then save the specified settings. Press the [Esc] key to quit Pconsole. Use the NetWare server console to load PSERVER.NLM. Océ cm3522/cm2522 1-73...
Page 87: For The Print Server Mode With Netware 4.X Bindery Emulation
Enter the appropriate names in the "Print Server Name", "Printer Name", "Print Queue Name", and "Print Queue Volume" fields, select "Other/Unknown" from the "Printer type" field, and then save the specified settings. Use the NetWare server console to load PSERVER.NLM. Océ cm3522/cm2522 1-74...
Page 88: For Netware 4.X/5.X/6 Print Server Mode (Nds)
Right -click "Organization" or "Organizational unit" container where a printer agent is created, and then select "NDPS Printer" on the "Create" submenu. In the "NDPS Printer Name" box, enter the "printer name". In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click "Create". Océ cm3522/cm2522 1-75...
Page 89: Netware Status
The printer driver registration screen appears. Select "None" for each operating system to complete the registration. 1.26.2 NetWare Status In Administrator mode of Web Connection, select the Network tab - "NetWare Setting" - "NetWare Status". NetWare connection status can be checked, if necessary. Océ cm3522/cm2522 1-76...
Page 90: Using The Ws-Print Function
For details on installing the printer driver, refer to the User’s Guide [Print Operations]. 1.27.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-77...
Page 91 In Administrator mode of Web Connection, select the Network tab - "Web Service Settings" - "Web Service Common Settings". Specify the following setting. Item Definition Prior confirmation Friendly Name Specify setting for Friendly Name (up to 63 characters). Océ cm3522/cm2522 1-78...
Page 92: Printer Settings
Definition Prior confirmation Print Function Select "ON". Printer Name* Specify the printer name (up to 63 characters). Printer Location* Specify the printer location (up to 63 characters). Printer Information* Specify the printer information (up to 63 characters). Océ cm3522/cm2522 1-79...
Page 93: Using The Ws-Scan Function
For details on the WS-Scan function, refer to the User’s Guide [Network Scan/Fax/Network Fax Operations]. 1.28.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-80...
Page 94: Web Service Common Settings
In Administrator mode of Web Connection, select the Network tab - "Web Service Settings" - "Web Service Common Settings". Specify the following setting. Item Definition Prior confirmation Friendly Name Specify setting for Friendly Name (up to 63 characters). Océ cm3522/cm2522 1-81...
Page 95: Scanner Settings
Specify the scanner name (up to 63 characters). Scanner Location* Specify the scanner location (up to 63 characters). Scanner Information* Specify the scanner information (up to 63 characters). Connection Timeout Specify the time period before the server connection times out. Océ cm3522/cm2522 1-82...
Page 96: Using Ssl For Communication From Vista To This Machine With Web Service
In Administrator mode of Web Connection, select the Network tab - "Web Service Settings" - "Web Service Common Settings". Specify the following settings. Item Definition Prior confirmation Friendly Name Specify setting for Friendly Name (up to 63 characters). SSL Setting Select "Enable". Océ cm3522/cm2522 1-83...
Page 97: Using Ssl For Communication From This Machine To Vista With Web Service
In Administrator mode of Web Connection, select the Network tab - "Web Service Settings" - "Web Service Common Settings". Specify the following settings. Item Definition Prior confirmation Friendly Name Specify setting for Friendly Name (up to 63 characters). SSL Setting Select "Enable". Océ cm3522/cm2522 1-84...
Page 98: Action For Invalid Certificate
If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid. Océ cm3522/cm2522 1-85...
Page 99: Monitoring This Machine Using The Snmp Manager
Use TCP/IP Use IPX/SPX TCP/IP Settings NetWare Setting SNMP Setting Finish 1.31.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-86...
Page 100: Netware Setting
In Administrator mode of Web Connection, select the Network tab - "NetWare Setting" - "NetWare Setting". Specify the following settings. Item Definition Prior confirmation IPX Setting Select "ON". Ethernet Frame Type Specify the frame type to be used. Frame type Océ cm3522/cm2522 1-87...
Page 101: Snmp Setting
Specify the name of read only user (up to 32 characters). Security Level Specify the security level for read only user. auth-password Specify the read only user authentication password to be used for authentication (up to 32 characters). Océ cm3522/cm2522 1-88...
Page 102 (up to 32 characters). priv-password Specify the reading/writing user privacy password to be used for privacy (encryption) (up to 32 characters). Encryption Algorithm Specify the encryption algorithm. Authentication Method Specify the authentication method. Océ cm3522/cm2522 1-89...
Page 103: Providing Notification Of The Status Of This Machine (E-Mail)
Port Number Default setting: 25 Port number for the serv- Specify the port number. Connection Timeout Specify the time period before the server connection times out. Max Mail Size Select whether to limit the size of sent messages. Océ cm3522/cm2522 1-90...
Page 104: E-Mail Tx (Smtp)
Provides notification when the finisher tray becomes full. Service Call Provides notification when a service call occurs. Job Finished Provides notification when the job is completed. Hole-Punch Scrap Box Provides notification when hole-punch scraps must be re- Full moved. Océ cm3522/cm2522 1-91...
Page 105: Smtp Authentication
POP over SSL Specify the settings for POP over SSL. For details, refer to "POP over SSL" on page 1-28. 1.32.8 APOP Authentication Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. Océ cm3522/cm2522 1-92...
Page 106: Providing Notification Of The Status Of This Machine (Trap)
"Monitoring this machine using the SNMP manager" on page 1-86. 1.33.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-93...
Page 107: Netware Setting
1.33.4 Status Notification Setting In Administrator mode of Web Connection, select the Maintenance tab - "Status Notification Setting" - "IP (IPX) Address" - [Edit]. For details on the settings, refer to "Status Notification Setting" on page 1-91. Océ cm3522/cm2522 1-94...
Page 108: Providing Notification Of The Counter Information Status Of This Machine Via E-Mail
POP over SSL? APOP? POP over SSL APOP Authentication Finish 1.34.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-95...
Page 109: E-Mail Tx (Smtp)
If the mail software used for receiving mails does not have mail soft the mail restore function, the mails may not be read. Divided Mail Size To divide the mail, specify a divided mail size. Receiving limit of the server Océ cm3522/cm2522 1-96...
Page 110: Total Counter Notification Setting
Specify the notification addresses (up to 320 characters). Notification address dress Select the desired notification schedule. 1.34.4 SMTP over SSL/Start TLS Specify the settings for SMTP over SSL/Start TLS. For details, refer to "SMTP over SSL/Start TLS" on page 1-25. Océ cm3522/cm2522 1-97...
Page 111: Smtp Authentication
Specify the settings for APOP authentication. For details, refer to "APOP Authentication" on page 1-30. 1.34.9 Meter Count In Administrator mode of Web Connection, select the Maintenance tab - "Meter Count". The counter information managed by the machine can be displayed. Océ cm3522/cm2522 1-98...
Page 112: Limiting Users Using This Machine (Machine Authentication)
User Auth/Account Track User Authentication Account Track Synchronize user authentica- tion and account track User Registration Account Track Registration Account Track Registration User Registration Finish Note For details on the machine authentication, refer to the User’s Guide [Copy Operations]. Océ cm3522/cm2522 1-99...
Page 113: User Auth/Account Track
Specify the operation that is performed when the number of Reach Maximum copies or printouts have reached its maximum. Detail If Enhanced Security Mode is set to "ON", the authentication method cannot be set to "OFF". In addition, "Public User Access" is set to "Restrict". Océ cm3522/cm2522 1-100...
Page 114: User Registration
In Administrator mode of Web Connection, select the Security tab - "User Registration" - [New Registration]. Specify the following settings. Item Definition Prior confirmation Enter the registration number. User Name Enter the user name. E-mail Address Enter the E-mail address. Océ cm3522/cm2522 1-101...
Page 115 "Password Rules". For details on the password rules, refer to the User’s Guide [Copy Operations]. For details on limiting access to destinations, refer to "Limiting accessible destinations by user" on page 1-140. Océ cm3522/cm2522 1-102...
Page 116: Account Track Registration
If you have already registered a user password containing less than eight characters, change it to one using eight characters before enabling "Password Rules". For details on the password rules, refer to the User’s Guide [Copy Operations]. Océ cm3522/cm2522 1-103...
Page 117: Limiting Users Using This Machine (Active Directory)
Specify settings to use this machine in a TCP/IP network environment. When using Active Directory, specify a DNS server synchronized with Active Directory in the DNS Server Settings of this machine. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-104...
Page 118: External Server Registration
Prior confirmation Displays the registration number. External Server Name Enter the name of the external authentication server (up to 32 characters). External Server Type Select "Active Directory". Default Domain Name Enter the default domain name. Default domain name Océ cm3522/cm2522 1-105...
Page 119: User Auth/Account Track
In Administrator mode of Web Connection, select the Security tab - "Authentication" - "User Auth/Account Track". Specify the following settings. Item Definition Prior confirmation General Settings Select "ON (External Server)". Ticket Hold Time Setting Specify the ticket hold time. (Active Directory) Océ cm3522/cm2522 1-106...
Page 120: Default Function Permission
Print User Box Print Scan/Fax from User 1.36.5 Date/Time Setting When using Active Directory, specify the date and time on this machine. For details, refer to "Specifying the date and time on this machine" on page 1-16. Océ cm3522/cm2522 1-107...
Page 121: Limiting Users Using This Machine (Windows Domain/Workgroup)
To execute NTLM authentication in the IPv6 environment, the Direct Hosting setting must be enabled. Prepare a DNS server and be sure to specify the DNS settings of this machine correctly. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-108...
Page 122 External Server Type Select "NTLM v1" or "NTLM v2". NTLMv2 is applied from Windows NT 4.0 (Service Pack 4). Default Domain Name Enter the default domain name. Default domain name Enter the default domain name in uppercase letters. Océ cm3522/cm2522 1-109...
Page 123 Specify the following setting. Item Definition Prior confirmation General Settings Select "ON (External Server)". 1.37.4 Default Function Permission Limits functions available to authorized users on this machine. For details, refer to "Default Function Permission" on page 1-107. Océ cm3522/cm2522 1-110...
Page 124 To use the WINS server, specify settings for the WINS server. For details, refer to "WINS Setting" on page 1-22. 1.37.7 Direct Hosting Setting To execute NTLM authentication in the IPv6 environment, enable the Direct Hosting setting. For details, refer to "Direct Hosting Setting" on page 1-21. Océ cm3522/cm2522 1-111...
Page 125: Limiting Users Using This Machine (Nds)
NDS is available only when IPX is used as the protocol. NDS is not available when IP is used. 1.38.1 External Server Registration In Administrator mode of Web Connection, select the Security tab - "Authentication" - "External Server Registration" - [Edit]. Specify the following settings. Océ cm3522/cm2522 1-112...
Page 126: User Auth/Account Track
Specify the following setting. Item Definition Prior confirmation General Settings Select "ON (External Server)". 1.38.3 Default Function Permission Limits functions available to authorized users on this machine. For details, refer to "Default Function Permission" on page 1-107. Océ cm3522/cm2522 1-113...
Page 127: Netware Setting
In Administrator mode of Web Connection, select the Network tab - "NetWare Setting" - "NetWare Setting". Specify the following settings. Item Definition Prior confirmation IPX Setting Select "ON". Ethernet Frame Type Specify the frame type to be used. Frame type User Authentication Set- Select "ON". ting Océ cm3522/cm2522 1-114...
Page 128: Limiting Users Using This Machine (Ldap)
Communicate with the LDAP server using SSL? LDAP over SSL Finish 1.39.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-115...
Page 129: External Server Registration
Specify the maximum wait time for a search operation. Authentication Method Select the authentication method used for logging in to the Authentication method LDAP server. for the server Search Attribute If "Digest-MD5" is selected as the authentication method, specify the search attribute. Océ cm3522/cm2522 1-116...
Page 130: User Auth/Account Track
Specify the following setting. Item Definition Prior confirmation General Settings Select "ON (External Server)". 1.39.4 Default Function Permission Limits functions available to authorized users on this machine. For details, refer to "Default Function Permission" on page 1-107. Océ cm3522/cm2522 1-117...
Page 131: Ldap Over Ssl
If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid. Océ cm3522/cm2522 1-118...
Page 132: Performing Ip Address Filtering
Specify permitted addresses. (Format: "***.***.***.***", Range Permitted addresses for ***: 0 to 255) Deny Access To specify denied addresses, select "Enable". Set 1 to 5 Specify denied addresses. (Format: "***.***.***.***", Range for Denied addresses ***: 0 to 255) Océ cm3522/cm2522 1-119...
Page 133: Communicating Using Ipv6
For details on the direct hosting service, refer to the following sections. "Sending scan data to a Windows computer" on page 1-19 "Printing (SMB)" on page 1-64 "Limiting users using this machine (Windows domain/workgroup)" on page 1-108 Océ cm3522/cm2522 1-120...
Page 134: Tcp/Ip Setting
Setup items by operation TCP/IP Setting In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP Setting". Specify the following settings. Océ cm3522/cm2522 1-121...
Page 135 Gateway Address When not automatically obtain the IPv6 address, specify the Gateway address IPv6 gateway address. Detail If necessary, specify settings for DNS. For details, refer to "Specifying general settings for TCP/IP- based communication" on page 1-2. Océ cm3522/cm2522 1-122...
Page 136: Communicating Using Ipsec
Specify the settings according to the following flowchart. TCP/IP Settings IPsec IKE Setting SA Setting Peer Finish 1.42.1 TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. Océ cm3522/cm2522 1-123...
Page 137: Ipsec
Setup items by operation 1.42.2 IPsec In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "IPsec". Specify the following setting. Item Definition Prior confirmation IPsec Select "ON". Océ cm3522/cm2522 1-124...
Page 138: Ike Setting
When "ESP" is selected for "Security Protocol", specify the rithm ESP encryption algorithm. ESP Authentication Al- When "ESP" is selected for "Security Protocol", specify the gorithm ESP authentication algorithm. AH Authentication Algo- When "AH" is selected for "Security Protocol", specify the rithm AH authentication algorithm. Océ cm3522/cm2522 1-125...
Page 139: Peer
To increase the IKE strength, select "ON". Peer Specify the IP address of the peer. IP address of the peer Pre-Shared Key Text Specify the Pre-Shared Key text shared with the peer. Encapsulation Mode Specify the operation mode of IPsec. Océ cm3522/cm2522 1-126...
Page 140: Using The Tcp Socket/Openapi/Ftp Server Function
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. 1.43.2 SSL/TLS Setting Specify settings for SSL-based communication. For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 1-7. Océ cm3522/cm2522 1-127...
Page 141: Tcp Socket Setting
To use SSL/TLS, select the "Use SSL/TLS" check box. Whether to use SSL/TLS Port No. (SSL) Specify the port number used in SSL communication. Detail If Enhanced Security Mode is set to "ON", the "Use SSL/TLS" check box is selected. Océ cm3522/cm2522 1-128...
Page 142: Openapi Setting
To use SSL/TLS, select the "Use SSL/TLS" check box. Use SSL/TLS? Port No. (SSL/TLS) Specify the port number used in SSL communication. Detail If Enhanced Security Mode is set to "ON", the "Use SSL/TLS" check box is selected. Océ cm3522/cm2522 1-129...
Page 143: Ftp Server Setting
In Administrator mode of Web Connection, select the Network tab - "FTP Setting" - "FTP Server Setting". Specify the following setting. Item Definition Prior confirmation FTP Server Select "ON". Detail If Enhanced Security Mode is set to "ON", "OFF" is selected. Océ cm3522/cm2522 1-130...
Page 144: Other Items On The Maintenance Tab
To send scanned data to external memory, select "ON". To prevent data from being stolen, "OFF" is specified as default. To use an external mem- ory, select "ON". Print Document To print data in external memory, select "ON". Océ cm3522/cm2522 1-131...
Page 145: Using The Timer Function
Specify the time period before the machine enters Low Power mode. ting Sleep Mode Setting Specify the time period before the machine enters Sleep mode. Power Save Key Manually specify the setting for the power save function (Low Power or Sleep mode). Océ cm3522/cm2522 1-132...
Page 146: Weekly Timer Setting
To use the power save function, select this check box, and then specify the starting and ending times for power saving Use Overtime Password To use the non-business hours password function, select this check box, and then specify the password. Océ cm3522/cm2522 1-133...
Page 147: Importing Or Exporting Setting Information
When importing or exporting authentication data, operate user registration information in the same way. Operate the authentication data after operate the user authentication information. "Audit Log" is available when audit log setting is enabled on this machine. Océ cm3522/cm2522 1-134...
Page 148: Resetting Setting Information
In Administrator mode of Web Connection, select the Maintenance tab - "Reset" - "Network Setting Clear". To reset to the factory default network settings, click [Clear]. Detail If Enhanced Security Mode is set to "ON", this menu item does not appear. Océ cm3522/cm2522 1-135...
Page 149: Reset
In Administrator mode of Web Connection, select the Maintenance tab - "Reset" - "Reset". To reset the controller, click [Reset]. Format All Destination In Administrator mode of Web Connection, select the Maintenance tab - "Reset" - "Format All Destination". To delete all destinations registered on the machine, click [Format]. Océ cm3522/cm2522 1-136...
Page 150: Specifying Support Information
Specify the URL of the Web page for corporate (up to 127 characters). Supplies and Accesso- Specify consumables supplier information (up to 127 characters). ries Online Help URL Specify the online help URL (up to 127 characters). Driver URL Specify the driver storage location (up to 127 characters). Océ cm3522/cm2522 1-137...
Page 151: Registering The Header Or Footer
Specify the distribution number text. Select the output format, and then specify the start- ing number. Header/Footer Specify whether to print the following items. • Header String/Footer String (up to 40 characters each) • Date/Time Setting • Distribution Number • Job Number • Serial Number • User Name/Account Name Océ cm3522/cm2522 1-138...
Page 152: Checking The Rom Version
Setup items by operation 1.44.7 Checking the ROM version Check the ROM version of this machine. ROM Version In Administrator mode of Web Connection, select the Maintenance tab - ROM Version. Check the ROM version of this machine. Océ cm3522/cm2522 1-139...
Page 153: Other Items On The Security Tab
"Reference Allowed Group Registration" - [Edit]. Specify the following settings. Item Definition Displays the registration number. Reference Allowed Specify the reference allowed group name (up to 24 characters). Group Name Access Allowed Level Specify the access allowed level for the group. Océ cm3522/cm2522 1-140...
Page 154: Restricting Address Registration By A User
Restricting address registration by a user Restrict address registration or change by a general user. Permission of Address Change In Administrator mode of Web Connection, select the Security tab - "Permission of Address Change". Specify the following setting. Océ cm3522/cm2522 1-141...
Page 155: Specifying The Auto Logout Time
Administrator mode. User Mode Logout Time Specify the time period before the user is automatically logged out when no operation is performed for a certain period of time in the user mode. Océ cm3522/cm2522 1-142...
Page 156: Specifying The Administrator Password
If you have already registered a user password containing less than eight characters, change it to one using eight characters before enabling "Password Rules". For details on the password rules, refer to the User’s Guide [Copy Operations]. Océ cm3522/cm2522 1-143...
Page 157: Box Tab Settings
To change the user box password, select the check box. Specify the current password changed. and the new password (up to 8 characters). User Box Owner is To change the user box owner, select this check box to select the box type. changed. Océ cm3522/cm2522 1-144...
Page 158: Creating A New User Box
Specify the period during which data in the user box is saved. User Box Expansion To add the confidential reception function to the user box, specify the password (up to 8 Function characters). This setting appears when the optional fax kit is installed. Océ cm3522/cm2522 1-145...
Page 159: Changing System Box Settings Or Deleting System Boxes
Specify the period during which data in the user box is saved. User Box Password is Change the user box password (up to 8 characters). changed. User Box Owner is To change the user box owner, select this check box, and then specify the box type. changed. Océ cm3522/cm2522 1-146...
Page 160: Creating A New System User Box
If the optional FAX kit is installed, "Bulletin Board User Box" and "Relay User Box" are selectable. Create System User Box In Administrator mode of Web Connection, select the Box tab - "Create System User Box". Specify the following settings. (The screen when "Bulletin Board User Box" is selected) Océ cm3522/cm2522 1-147...
Page 161 If you have already registered a user password containing less than eight characters, change it to one using eight characters before enabling "Password Rules". For details on the password rules, refer to the User’s Guide [Copy Operations]. Océ cm3522/cm2522 1-148...
Page 162: Print Setting Tab Settings
Specifies the number of copies to be printed. Default Paper Size Specifies the paper size. Original Direction Select the original direction. Spool Print Jobs in HDD Select whether to spool a print job to HDD. before RIP Océ cm3522/cm2522 1-149...
Page 163: Specifying Settings For Pcl/Ps/Xps Print
Specify the symbol set. Typeface Select the internal font ("Resident Font") or downloaded font ("Download Font"). Font Size Specify the font size. Line/Page Specify the number of lines per page. CR/LF Mapping Specify the text data CR/LF replacement method. Océ cm3522/cm2522 1-150...
Page 164: Ps Setting
Specify the default value of the profile when "Text" is selected by the printer driver. Figure/Table/Graph Specify the default value of the profile when "Figure/Table/Graph" is selected by the print- er driver. Simulation Profile Specify the default value of the ICC profile for simulation. Océ cm3522/cm2522 1-151...
Page 165: Xps Settings
Interface Setting In Administrator mode of Web Connection, select the Print Setting tab - "Interface Setting". Specify the following settings. Item Definition Network Timeout Specify the reception timeout for the network. USB Timeout Specify the USB timeout. Océ cm3522/cm2522 1-152...
Page 166: Store Address Tab Settings
S/MIME Shows whether or not a certificate is attached to the E-mail destination. [Edit] Edits the registered address. The settings are the same as ones available during registra- tion. [Delete] Deletes the address from the address book. Océ cm3522/cm2522 1-153...
Page 167 Type in the password for logging in to the computer of the destination (up to 14 charac- ters). Limiting Access to Desti- Specify the group that is allowed to access a destination and reference allowed level. nations Océ cm3522/cm2522 1-154...
Page 168 Click [Display], and then select the check box for the displayed item ("V34 off", "ECM Off", "International Communication" or "Check Dest. & Send"). Limiting Access to Desti- Specify the group that is allowed to access a destination and reference allowed level. nations Océ cm3522/cm2522 1-155...
Page 169 Enter the address for the destination (up to 320 characters). Resolution Specifies the resolution. Paper Size Specifies the paper size. Compression Type Specify the compression method. Limiting Access to Desti- Specify the group that is allowed to access a destination and reference allowed level. nations Océ cm3522/cm2522 1-156...
Page 170: Registering Or Editing A Group Destination
Select the user boxes to be grouped. Select addresses to be grouped from the list of reg- istered addresses. [Check Destination] Checks registered destinations. Limiting Access to Desti- Specify the group that is allowed to access a destination and reference allowed level. nations Océ cm3522/cm2522 1-157...
Page 171: Registering Or Editing A Program Destination
Deletes the program destination. When "E-mail" was selected using [Registration] Item Definition Displays the registration number. Name Type in the registration name (up to 24 characters). Destination Information Specify the address information. Select "Select from Address Book" or "Direct Input". Océ cm3522/cm2522 1-158...
Page 172 Resolution Specifies the resolution. File Type Specify the file format. File Name Specify the file name (up to 30 characters). Page Setting Specify the unit of data to be saved. Simplex/Duplex Specify whether the original is 2-sided. Océ cm3522/cm2522 1-159...
Page 173 Adjust the density of the background. Scan Size Specify the original size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Océ cm3522/cm2522 1-160...
Page 174 "Address". To select a destination from the list, click [Search from List]. Original Direction Specify the original orientation. 2-Sided Binding Direc- Specify the binding orientation of the original. tion Special Original Specify the original in a different size. Book Scan Specify whether to perform book scan. Océ cm3522/cm2522 1-161...
Page 175 If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune", "Color", and "Size". Compose Specify whether to print a header/footer. (Header/Footer) If yes, specify the registration number of the header/footer. To check the registered head- er/footer, click [Confirm Registered Contents]. Océ cm3522/cm2522 1-162...
Page 176 Stamp Combine Method Specify the stamp composition method. Limiting Access to Desti- Click [Display], and then specify the group that is allowed to access a destination and ref- nations erence allowed level. Océ cm3522/cm2522 1-163...
Page 177 To use the default subject, select "Not Specified". To check the contents of the subject, click [Subject List]. Text Specify the E-mail text. To use the default subject, select "Not Specified". To check the contents of the subject, click [Text List]. Océ cm3522/cm2522 1-164...
Page 178 Adjust the density of the background. Scan Size Specify the original size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Océ cm3522/cm2522 1-165...
Page 179 If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Application Setting Click the [Display] button, and then specify settings for the functions that are displayed. Océ cm3522/cm2522 1-166...
Page 180: Registering Or Editing Destinations To Be Temporarily Used
The settings are the same as the program destination settings. For "Temporary One-Touch", the settings for "Limiting Access to Destinations" are not displayed. For details on settings for "Temporary One-Touch", refer "Registering or editing a program destination" on page 1-158. Océ cm3522/cm2522 1-167...
Page 181: Registering E-Mail Subject Or Text
Register the E-Mail subject (up to 64 characters). Text In Administrator mode of Web Connection, select the Store Address tab - "Text" - [Edit]. Specify the following settings. Item Definition Displays the registration number. Text Register the E-Mail body text (up to 256 characters). Océ cm3522/cm2522 1-168...
Page 182: Using An Application Registered In An External Server
Keyboard Type Default Value Options User ID ASCII Walkup Password Password ASCII Password Auth# Authentication None Subject Subject ASCII BillingCode1 BillingCode1 ASCII BillingCode2 BillingCode2 ASCII CoverSheet Type CoverSheet Document PW DocumentPass- ASCII word Delivery Method Delivery Secure Océ cm3522/cm2522 1-169...
Page 183: Application Registration
Enter the password for logging in to the server (up to 31 characters). anonymous Specify whether even an anonymous user can access the destination. PASV Mode Register whether to make communication in the PASV mode. Proxy Specifies whether or not a proxy server is used. Océ cm3522/cm2522 1-170...
Page 184 (When "Delivery" is se- lected) Options Select "Yes" or "No". (When "Hold For Pre- view" is selected) Input Type Select "Year/Month/Day/Hour/Minute". (When "DelaySendData- Time" is selected) Default Select either "Device Time" or "Not Specify". (When "DelaySendData- Time" is selected) Océ cm3522/cm2522 1-171...
Page 185: Simplifying E-Mail Address Entry
In Administrator mode of Web Connection, select the Store Address tab - "Prefix/Suffix" - [Edit]. Specify the following settings. Item Definition Displays the registration number. Prefix Register the prefix (up to 20 characters). Suffix Register the suffix (up to 64 characters). Océ cm3522/cm2522 1-172...
Page 186: Network Settings
Network Settings...
Page 187: Displaying The Network Settings Screen
When setting the Utility screen, you can also select a setting by using the keypad to enter the number next to the desired button. To select [3 Administrator Settings], press the [3] key in the keypad. Type in the password, and then touch [OK]. Océ cm3522/cm2522...
Page 188 In order to apply all changes to the network settings, turn off this machine, then on again. When turning off the main power switch and turning it on again, wait for 10 seconds or longer after power-off, and then turn on the power again. Otherwise, the machine may not operate correctly. Océ cm3522/cm2522...
Page 189: Network Settings Menu List
ARP/PING Set- ON/OFF tings AUTO IP Set- ON/OFF tings DNS Host DNS Host Name Dynamic DNS Enable/Disable Setting DNS Domain DNS Domain Enable/Disable Name Auto Retrieval Default DNS Domain Name DNS Search Domain Name 1 to 3 Océ cm3522/cm2522...
Page 190 Auto IPv6 Set- IPv6 Settings tings Global Address Prefix Length Gateway Address Link-Local Address IPsec Settings IKE Settings Group 1 - 4 Encryption Al- DES_CBC gorithm 3DES_CBC Authentication Algorithm SHA-1 Key Validity Period Diffie-Hellman Group 1 Group Group 2 Océ cm3522/cm2522...
Page 191 DES_CBC tion Algorithm 3DES_CBC AES_CBC AES_CTR NULL ESP Authenti- cation Algorithm SHA-1 AH Authentica- tion Algorithm SHA-1 Encapsulation Peer Group 1 - 10 Tunnel Mode Mode Transport Mode IP Address Pre-Shared Key Text Perfect For- ON/OFF ward Secrecy Océ cm3522/cm2522...
Page 192 NDS Tree Name Nprinter/ Print Server Rprinter Name Printer Number Status User Authentica- ON/OFF tion Setting (NDS) [3] HTTP Server Settings Web Settings ON/OFF IPP Settings ON/OFF Accept IPP jobs ON/OFF Support Information Print Job Valid Job Cancel Job Océ cm3522/cm2522...
Page 193 User Name Password realm [4] FTP Settings FTP TX Set- Proxy Server Address Input Host Name tings IPv4 Address Input IPv6 Address Input Proxy Server Port Number Port No. Connection Timeout FTP Server ON/OFF Settings Océ cm3522/cm2522...
Page 194 P Node M Node H Node ON/OFF Direct Hosting Setting [6] LDAP Settings Enabling LDAP ON/OFF Setting Up LDAP LDAP Server Name Max. Search Results Timeout Name Initial Setting for Search Details E-Mail Fax Number Last Name First Name Océ cm3522/cm2522...
Page 195 Use User Authentica- tion Dynamic Authentica- tion Referral Setting ON/OFF Login Name Password Domain Name Reset All Settings Default LDAP Server Setting [7] E-Mail Settings Scan to E-Mail ON/OFF E-Mail TX (SMTP) Status Notification ON/OFF ON/OFF Total Counter Notification Océ cm3522/cm2522 2-10...
Page 196 POP Before SMTP Time E-Mail RX POP Server Ad- Input Host (POP) dress Name IPv4 Address Input IPv6 Address Input Connection Timeout SSL Setting ON/OFF Port No. Port Number (SSL) Login Name Password ON/OFF APOP Authenti- cation Océ cm3522/cm2522 2-11...
Page 197 SNMP v1(IPX) ON/OFF UDP Port Number SNMP v1/v2c Settings Read Community Name Set- tings Write Setting Enable/Disable Write Community Name Set- tings SNMP v3 Settings Context Name Settings Discovery User Permissions ON/OFF Discovery User Name Set- tings Océ cm3522/cm2522 2-12...
Page 198 Password Setting (Write) Read auth Read priv Write auth Write priv Encryption Algorithm AES-128 Authentication Algorithm SHA-1 TRAP Setting Allow/Restrict TRAP Setting When Au- Enable/Invalid thentication Failed [9] AppleTalk Settings AppleTalk Set- Printer Name tings Zone Name Current Zone Océ cm3522/cm2522 2-13...
Page 199: Network Settings Screen (1/2)
TCP Socket (ASCII Mode) Port Number (ASCII Mode) [2] Network Fax Settings Network Fax Function Settings IP Address Fax Function ON/OF Internet Fax Function ON/OF SMTP TX Settings Port No. Connection Timeout SMTP RX Settings Port No. Connection Timeout Océ cm3522/cm2522 2-14...
Page 200 Printer Information Scanner Settings Scanner Name Scanner Location Scanner Information Connection Timeout [5] Detail Settings MAC Address Device Set- ting Network Speed Auto Setting 10Mbps Half Du- plex 10Mbps Full Du- plex 100Mbps Half Duplex 100Mbps Full Duplex Océ cm3522/cm2522 2-15...
Page 201 Date Setting Settings Weekly Weekly Fre- quency Day of the Week Daily Interval of Day(s) Address 1 - 3 Edit E-Mail Address Notification Ad- dress Setting Schedule 1 - 2 Schedule Set- tings Model Name Send Now Océ cm3522/cm2522 2-16...
Page 202 Confirma- dress tion IPv4 Address In- IPv6 Address In- Check Connec- tion SLP Setting Enable/Disable LPD Setting Enable/Disable ON/OFF Setting ON/OFF Prefix/Suf- fix Setting Prefix Prefix/Suffix Setting Suffix Delete the Job Action for Invalid Cer- tificate Continue Océ cm3522/cm2522 2-17...
Page 203: Network Settings Screen (2/2)
Network Settings Océ cm3522/cm2522 2-18...
Page 204: Appendix
Appendix...
Page 205: Product Specifications (Network Functions)
Player (plug-in version 7.0 or later required if "Flash" is selected as the display format) Setup Saved to non-volatile memory If you specify the search condition to when using the LotusDominoServer, it does not "OR" "END" work properly. Océ cm3522/cm2522...
Page 206: Glossary
TCP/IP network automatically specifies the network settings from the server. Currently, DHCP, which is an advanced protocol based on BOOTP, is mainly used. This is an abbreviation of bit per second. It means the amount of data sent in one second as the unit of data transmission. Océ cm3522/cm2522...
Page 207 A system that acquires the supported IP addresses from host names in a network environment. DNS allows the user to access other computers over a network by specifying host names, instead of having to use IP addresses that are difficult to re- member and complicated. Océ cm3522/cm2522...
Page 208 Abbreviation for HyperText Transfer Protocol. A protocol used to send and receive data between a Web server and a client (Web browser). Documents containing im- ages, recordings, or video clips can be exchanged with the expressive form informa- tion. Océ cm3522/cm2522...
Page 209 The operation of optically scanning the document and converting it to image data. Main scanning direction This is the horizontal direction of scanned documents. Manual transmission An operation to send a fax while checking the status of the receiving machine. Océ cm3522/cm2522...
Page 210 Abbreviation for Operating System. Basic software for controlling the system of a computer. Windows, MacOS, and Unix are Operating Systems. Outline font A font using lines and curves to display an outline of a character. Large-size characters can be displayed on a screen or printed with no jagged edges. Océ cm3522/cm2522...
Page 211 This is a function for registering recipient’s fax numbers where faxes are frequently sent and received and preset transmission operation procedures. By simply pressing the program key, the address is specified and the communication can be automati- cally performed with the specified functions. Océ cm3522/cm2522...
Page 212 The direction that the image sensors are moved is called the main scanning direction, and the direction in which the image sensors are arranged is called the sub-scanning direction. Screen font A font for displaying text and symbols on a CRT monitor. Océ cm3522/cm2522...
Page 213 Specifies the transmission speed of modem for fax. In this function, the fax can be communicated at a high transmission speed of 33,600 bps. When overseas commu- nication mode is set, it communicates at a high transmission speed a with a noise of 7200 bps or 4800 bps. Océ cm3522/cm2522 3-10...
Page 214 This function first confirms the document size which cannot detect correct document size due to folds, then scans and sends the document data after verifying the correct document size. This function can be used only when the document is scanned by ADF. Océ cm3522/cm2522 3-11...
Page 215 Index...
Page 216 Download ............1-13 Login ..............1-6 DSN Request ............1-50 Logout ............... 1-142 Dynamic DNS ............1-2 Low Power mode ..........1-132 LPD ..............1-63 LPR ..............1-63 E-mail ......1-23 1-31 1-33 1-90 1-158 E-mail Address ............ 1-14 Océ cm3522/cm2522...
Page 217 Weekly Timer ............ 1-133 Reset ............. 1-135 1-136 WINS ..............1-22 ROM Version ............. 1-139 Workgroup ..........1-65 1-108 WS-Print .............. 1-77 WS-Scan ............. 1-80 S/MIME ..........1-32 1-34 1-56 Security ............. 1-140 Sleep mode ............1-132 XPS ..............1-152 Océ cm3522/cm2522...
Page 218 Beyond the Ordinary Printing for Professionals Océ North America Document Printing Systems 100 Oakview Drive Trumbull, CT 06611 Copyright 2008, Océ Imagistics Inc. www.oce.com All Rights Reserved...

This manual is also suitable for:

Cm2522

Oce cm3522 User Manual

About this Manual

User's Guides

1 Setup Items by Operation

Quick Links

Related Manuals for Oce cm3522

Summary of Contents for Oce cm3522