Table of Contents
Advertisement
Use the higher and lower arrow buttons to set the time.
4
When ready, quit the key operator system.
5
Disabling the automatic switch off
Access the key operator system (see page 14).
1
Open the 'Machine' section and select the 'Defaults'.
2
If switch off mode enabling is not configured, the following screen
Note:
will be displayed. The settings cannot be changed.
[18] Enabling 'Switch off' not configured
Press the 'Switch-off timer' function button (see figure 19).
3
[19] 'Switch-off timer'
Select 'Off' to disable the automatic switch-off timer.
4
When ready, quit the key operator system.
5
Changing the automatic sleep time (network copier)
Access the key operator system (see page 14).
1
Open the 'Machine' section and select the 'Basic' settings.
2
Press the 'Power saving' function button once or twice to activate the 'Sleep
3
after' function (see figure 20).
34
Océ 31x5E Configuration and special maintenance
(see 'EP
A Energy Star®' on page 140)
Advertisement
Table of Contents
