[20] The 'Sleep' function.
Use the higher and lower arrow buttons to set the time.
4
When ready, quit the key operator system.
5
Disabling the sleep mode
Access the key operator system (see page 14).
1
Open the 'Machine' section and select the 'Defaults'.
2
If sleep mode enabling is not configured, the following screen will be
Note:
displayed. The settings cannot be changed.
[21] Enabling 'Sleep mode' not configured
Press the 'Sleep timer' function button (see figure 22).
3
[22] 'The sleep timer'
Configuration management
(see 'EP
A Energy Star®' on page 140)
35