Table of Contents
Advertisement
Return the cartridge by sliding it downwards to the left until it clicks into place.
14
Make sure that the first strip of staples does not slide out of the staple cartridge.
If necessary, close the stapler and lock it with the latch and screw.
15
Close the top cover.
16
Slide the frame to the left until it locks.
17
Close the paper compartment door.
18
Slide a small stack of paper into the stapling slot. Push it in until you hear the
19
staple mechanism click. Repeat the manual stapling 4 to 6 times, until a staple
is inserted through the paper. The stapler is now ready for operation.
Clearing a staple jam (50 sheet stapler)
Open the paper compartment door.
1
Slide the frame to the right using the blue handle marked 'A'.
2
Open the top cover of the finisher.
3
If the stapler is fastened, use a screwdriver or coin to unlatch it (see action 1 in
4
figure 85). Once the screw is loosened, you can slide the latch to the rear.
[85] Opening the 50-sheet stapler
Open the stapler by pulling the lever to the left and then lifting it (action 2 in
5
figure 85).
Remove any paper stuck between the stapler jaws.
6
106
Océ 31x5E Configuration and special maintenance
1
2
latch
Advertisement
Table of Contents
