Table of Contents
Advertisement
When ready, exit the key operator system.
4
Reading the copy counter behind the small front door
Open the small front door.
1
The copy counter is located to the right of the toner reservoir.
Note the counter readings.
2
Close the door.
3
Printing the system log file using the operating panel
Access the key operator mode (see 'Accessing the key operator system using
1
the operating panel' on page 14).
Open the 'Printing' section and select 'Reports'.
2
Press the 'Print system log file' function button.
3
[95] Printing the system log file
Press 'Start' (
4
The log file will be printed after you quit the key operator mode. If the DAC is
off, the report will not be printed.
When ready, exit the key operator mode.
5
Printing the system log file using Print Logic
Open the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Select the 'Status' tab.
2
116
Océ 31x5E Configuration and special maintenance
) to confirm.
Advertisement
Table of Contents
