Removing Print Jobs - Oce 31x5E Configuration And Maintenance Manual

Removing print jobs

If a major error has occurred, stop the DAC. If this does not solve the problem,
you may want to clear all print jobs from the DAC. It is also possible that the
problem is with the current job. Try to remove the current job first; if this does
not solve the problem, remove all jobs. The Océ service technician might also
request you to do so in order to perform service.
Please be aware that all jobs will be deleted from the automatic print
Note:
queue and that all mailboxes will be emptied.
[90] 'Remove all jobs' function
Removing all print jobs using the control panel
Access the key operator mode (see 'Accessing the key operator system using
1
the operating panel' on page 14).
Open the 'Printing' section and select 'DAC control'.
2
Press the 'Remove all jobs' function button.
3
Press 'Start' (
4
Exit the key operator mode.
5
Removing all print jobs using Print Logic
Access the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Click the 'Status' tab.
2
110 Océ 31x5E Configuration and special maintenance
) to confirm.