Operator recoverable errors
When the copier detects an error, the copier stops immediately. The paper path
indicator will lit and the length display shows an error code.
The following explains the general procedure in case of an operator
recoverable error
General procedure for operator recoverable errors
Remove the original.
1
Open the manual copy material feed table.
2
Remove the copy material.
3
Check the paper path.
4
Close the manual copy material feed table.
5
The following table gives an overview of possible causes and specific actions.
Error messages
Message
E0
E1
E2
Solving problems
Possible causes
Copy material is removed during
the copy process.
Stop button has been pressed
during a copy process.
Original feed problem.
Paper feed table is open.
Copy material is too short
Specific actions
Contact the key operator.
Close paper feed table.
Contact the key operator.
39