Preventing users from managing jobs
Operators in a central printing environment can take full control of all print
jobs by disabling the End-user control allowed option. Users can still print to
the Network Copier but can't control their jobs.
In combination with 'All new jobs to Mailbox' (see page 52), the operator will
be able to do his jobs without being interrupted by any user.
Enabling / disabling remote control for end-users
Access the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Open the 'Control' tab.
2
[35] End-user control
Deselect end-user control by selecting the 'End-user control allowed' option or
3
select to enable the option again.
Click 'Apply'.
4
When ready, close the key operator system.
5
All Print Logic users will be informed through a system notification
Note:
about the changed settings.
Configuration management
51