Table of Contents
Advertisement
Wait 20 seconds for the DAC to shut down. The power LED on the DAC will
5
automatically be turned off.
Stopping the DAC using Print Logic
Access the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Click the 'Status' tab.
2
[8] 'Status' tab with 'Shut down DAC...' function
Click the 'Shut down DAC' button.
3
Select 'Stop the DAC?'
4
Click 'OK'. The DAC will be stopped.The power LED on the DAC will be
5
automatically turned off.
To turn the DAC on, press the on/off switch on the DAC.
Note:
Introduction
23
Advertisement
Table of Contents
