Restarting The Dac - Oce 31x5E Configuration And Maintenance Manual

Restarting the DAC

If the DAC does not seem to function any more, you will need to reboot it with
the 'Restart DAC' function from the operating panel or using Print Logic. The
DAC will shut down and start again automatically. Unfinished print jobs at
shutdown time will be recovered.
[87] 'Restart DAC' function
Attention:
or by using the reset button on the DAC.
Restarting the DAC at the operating panel
Access the key operator mode (see 'Accessing the key operator system using
1
the operating panel' on page 14).
Open the 'Printing' section and select 'DAC control'.
2
Press the 'Restart DAC' function button.
3
Press 'Start' (
4
Exit the key operator mode.
5
Rebooting the DAC from a PC using Print Logic
Access the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Click the 'Status' tab.
2
108 Océ 31x5E Configuration and special maintenance
Do not attempt to reboot the DAC by turning it off and on again
) to confirm.