Table of Contents
Advertisement
Machine administrator setting
6.6
05 Network Setting
6.6.1
01 Machine NIC Setting
Control the NIC settings such as the IP address and line speed of the machine.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [05 Network Setting], and then [01 Machine NIC Setting].
The Machine NIC Setting Screen will be displayed.
3
Specify the following items.
–
Enter numeric values using the touch panel keypad. After entering a value, touch Set. The next item
becomes highlighted for setting. Continue in this manner.
IP Address: Enter the IP address of the machine.
Subnet Mask: Enter the subnet mask.
Gateway Address: Enter the gateway address.
DNS Server 1/DNS Server 2: To specify the mail server by the host name, enter the IP address of
the DNS server to DNS Server 1 or 2. When using two DNS servers, enter the IP address to both of
them.
To enable this setting change of the DNS server, the main body needs to be rebooted. Touch [OK],
and turn off then on the sub power switch.
Line Speed Setting: Specify the line speed of the network. Choose from the options provided.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Network Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
CS665 Pro
6
6-87
Advertisement
Table of Contents
