EPSON AcuLaser C4000/C4100/C3000
2.7 Mode
2.7.1 Print Mode
There are three print modes: Normal Mode, High Resolution Mode, and High
Gloss Mode. These modes have sub-categories based on resolution (600 dpi/
1200 dpi) and process speed (full speed/half speed).
When process speed is set to half speed, video data transfer speed to the ROS
is double the 600 dpi speed, yielding 1200 dpi resolution.
1. Use Normal Mode to print at 600 dpi
2. Use High Resolution Mode to print at 1200 dpi on plain paper
3. Use High Gloss Mode at 600 dpi with half speed to improve gloss on plain
paper
Relationships of resolution, process speed, paper and print mode are shown
below.
Table 2-1. Print Mode
Paper
Print Mode
Normal
High Resolution
Normal Paper
High Gloss
Normal
Special
Applications *
1
High Resolution
*1: Thick paper, Labels, Transparencies, Envelopes, Postcards
Operating Principles
Resolution / Process speed
600dpi
1200dpi
Simplex
Duplex
Simplex
Duplex
Full
Full
–
Speed
Speed
Half
Half
–
–
Speed
Speed
Half
Half
–
Speed
Speed
Half
–
–
Speed
Half
–
–
Speed
Operation Mode
2.7.2
The following five modes are available in the printer's Operation Mode.
DIAG TEST Mode
Printer is ready to receive diagnostic commands or is executing
diagnostics.
WAIT Mode
Printer is adjusting print quality.
READY Mode
Printer is ready to print.
PRINTING Mode
Printer is printing.
ERROR Mode
Printer has detected some kind of problem.
–
–
–
–
Mode
Revision F
2-82