Epson AcuLaser C4000 Service Manual page 370

EPSON AcuLaser C4000/C4100/C3000
Lifting the upper unit of the printer body should be done by
W A R N I N G
2 people.
When removing the FEEDER ASSY from the printer body
C A U T I O N
upper unit, be careful not to drop the upper unit or
damage the components.
When lifting the printer body, remove it by allowing the left
side HARNESS ASSY TEMP B (PL15.2.12) and right side
HARNESS ASSY OPF MAIN (PL15.2.8) and the HARNESS
ASSY FEEDER (PL4.3.28) to come free of the square holes
in the printer's main frame.
13. Lift the printer body and clear it from the FEEDER ASSY.
14. Remove the PICKUP ASSY. (See Section 4.2.7.11.)
15. Remove the CLUTCH ASSY TURN TRAY1. (See Section 4.2.7.18.)
16. Release the 1 hook securing the GEAR FEED 2 (PL4.3.13) to the shaft of
the PICKUP ASSY (PL4.3.1), the remove GEAR FEED 2.
17. Remove the GEAR IDLER (PL4.3.15) from the shaft of the PICKUP ASSY.
18. Remove the GEAR IDLER IN (PL4.3.19) from the shaft of the PICKUP
ASSY.
19. Remove the left and right E-rings securing the shaft of the ROLL ASSY
TURN to the PICKUP ASSY.
20. Remove the BEARING (PL4.3.7) securing the shaft at the left side of the
ROLL ASSY TURN from the PICKUP ASSY.
21. Remove the BEARING SLEEVE (PL4.3.22) securing the shaft at the left
side of the ROLL ASSY TURN from the PICKUP ASSY.
22. From the PICKUP ASSY, let the ROLL ASSY TURN slide to the left,
remove the left end of the ROLL ASSY TURN from the shaft socket hole,
then remove the ROLL ASSY TURN by pulling it up and to the left.
Disassembly and Assembly Disassembly Assembly Procedures
Revision F
4-354