EPSON AcuLaser C4000/C4100/C3000
4.2.4 COVER
4.2.4.1 CONTROL PANEL (PL1.1.1) Removal
1. Remove the COVER ASSY FRONT HEAD (PL1.1.2). (See Section
4.2.4.2.)
2. Remove the HOLDER LEVER OUT. (See Section 4.2.4.3.)
3. Release the 2 hooks securing the CONTROL PANEL (PL.1.1.1) to the
COVER ASSY FRONT HEAD. And then push the upper part of control
panel to outside a little bit.
4. Pull up the control panel to direction of allows on the figure, then remove
the CONTROL PANEL from the COVER ASSY FRONT HEAD.
Disassembly and Assembly
Figure 4-5. CONTROL PANEL (PL1.1.1) Removal (1)
Figure 4-6. CONTROL PANEL (PL1.1.1) Removal (2)
Disassembly Assembly Procedures
Revision F
4-309