Table of Contents
Advertisement
= on,
= off,
3. Press the
button to apply the setting and exit the font select mode.
About Your Printer's Default Settings
The default settings control many printer functions. While you can often set these functions
through your software or printer driver, you may sometimes need to change a default setting from
the printer's control panel using the Default Setting mode.
Default Setting mode
The following table lists the default settings and the options you can select in the Default Setting
mode. The settings are explained in detail after the table. For instructions on changing the default
settings, see "Changing default settings" on page 26.
Item
Page length for tractor
Skip over perforation
Auto tear off
Auto tear off wait time
Auto line feed
Print direction
Software
0 slash
I/F mode
Auto I/F wait time
Parallel I/F bidirectional mode
Roman
Sans Serif
= flashing
Setting / value *1
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch, 11inch,
70/6inch, 12inch, 14inch, 17inch
Off, On
Off, On
0.5 seconds, 3 seconds
Off, On
Bi-D, Uni-D, Auto
ESC/P2, IBM PPDS
Off (0),
Auto, Parallel, USB, Network*
10 seconds, 30 seconds
Off, On
LQ-690II/LQ-690IIN
Script
Others
3
Printer Basics
User's Guide
21
Advertisement
Table of Contents
