Mechanical Components
If you service a driving assembly (e.g., gears), first turn off the power
and unplug the power cord. Then manually rotate the assembly.
Do not touch the driving part (e.g., gears) while the
W A R N I N G
assembly (printer) is being driven.
.
High Temperature Assembly
To prevent you from becoming injured or burned, do the following:
Before working with a high temperature Assembly (e.g., Fuser
Assembly), turn off the power, unplug the power cord and wait until it
cools down.
The high temperature Assembly is very hot immediately
W A R N I N G
after any printer operations. Wait at least 40 minutes
before you start working on the printer.