EPSON AcuLaser C4000/C4100/C3000
3. When the window as shown in Figure 5-2 is displayed, check "USB
ID Input" and click "OK" button.
Figure 5-2. USB ID Input window 1
Adjustment
4. When the window as shown Figure 5-3 appears, input the serial
nember (10 digits) of the printer and click "OK" button to store the
USB ID information (18 digits in total) in EEPOM on the Main Board
of the printer. The USB ID value will be displayed in the status
window in the bottom area of the program for your later check of the
inputted USB ID.
Figure 5-3. USB ID Input window 2
USB ID Input
Revision F
5-459