Drive - Epson AcuLaser C4000 Service Manual

EPSON AcuLaser C4000/C4100/C3000

4.2.17 DRIVE

4.2.17.1 DRIVE ASSY DEVE (PL14.1.1) Removal
1. Remove the COVER ASSY TOP MAIN. (See Section 4.2.4.4.)
2. Remove the COVER SIDE R. (See Section 4.2.4.9.)
3. Remove the PWB DRIVE. (See Section 4.2.18.5.)
4. Remove the 5 screws (gold, tapped, 10mm) securing the DRIVE ASSY
DEVE from the right side of the printer body.
5. Remove the DRIVE ASSY DEVE from the printer body.
Figure 4-103. DRIVE ASSY DEVE (PL14.1.1) Removal
Disassembly and Assembly
4.2.17.2 DRIVE ASSY MAIN (PL14.1.2) Removal
1. Remove the COVER ASSY TOP MAIN. (See Section 4.2.4.4.)
2. Remove the COVER SIDE R. (See Section 4.2.4.9.)
3. Remove the LINK: R. (See Section 4.2.4.8.)
4. Disconnect the connector (P/J48, P/J52) on the PWB DRIVE (PL15.1.15)
5. Release the harness (J52) of the FUSER ASSY from the clamp on the
6. Remove the 1 screw (gold, tapped, with outside toothed lock washer,
7. Remove the 4 screws (gold, tapped, 10mm) securing the DRIVE ASSY
8. Remove the DRIVE ASSY MAIN from the printer body.
HANABI_BE_CHAP03_074FB
Disassembly Assembly Procedures
from the right side of the printer body.
DRIVE ASSY MAIN of the right side of the printer body.
6mm) securing the ground wire of the lower section of the DRIVE ASSY
MAIN.
MAIN to the printer body.
Figure 4-104. DRIVE ASSY MAIN (PL14.1.2) Removal
Revision F
J52
J48
HANABI_BE_CHAP03_075FC
4-403