Epson AcuLaser C4000 Service Manual page 416

EPSON AcuLaser C4000/C4100/C3000
4.2.16.3 ACTUATOR I/L (PL13.1.8) Removal
1. Remove the COVER ASSY TOP MAIN. (See Section 4.2.4.4.)
2. Remove the COVER SIDE R. (See Section 4.2.4.9.)
3. Remove the PWB DRIVE. (See Section 4.2.18.5.)
4. From the right side surface of the printer body, release the hooks of the
SPRING I/L (PL13.1.9) hanging from the convex part of the PLATE ASSY
LEVER R (PL13.1.9)
5. Release the 1 hook securing the ACTUATOR I/L to the part of the shaft on
the PLATE ASSY LEVER R from the printer body.
6. Remove the ACTUATOR I/L along with the SPRING I/L from the PLATE
ASSY LEVER R.
7. Remove the SPRING I/L from the ACTUATOR I/L.
Disassembly and Assembly Disassembly Assembly Procedures
Figure 4-101. ACTUATOR I/L (PL13.1.8) Removal
Revision F
4-401