Parking Brake Switch Test; Brake Fluid Level Switch Test - Honda EP3 Service Manual

Conventional Brake Components
Parking Brake Switch Test
1. Remove the rear console, and disconnect the
connector (A)from the switch (B).
Check for continuity between the switch terminal
a n d b o d y g r o u n d :
. With the brake lever up, there should be
continuity.
. With the brake lever down, there should be no
continuity.
R
'dFu
\ ! E
!UF-
Y
1 9 - 1 0
Brake Fluid Level Switch Test
Check for continuity between the terminals (A) with the
float in the down position and the up position.
. Remove the brake fluid completely from the reservoir.
With the float down, there should be continuity.
. F j l l t h e r e s e r v o i r w i t h b r a k e f l u i d t o M A X ( u p p e r ) l e v e l
(B). With the float up, there should be no continuity.
\