Honda EP3 Service Manual page 214

1 .
After the coolant has drained, tighten the radiator
drain plug securely. and installthe reserve tank
drain cap securely.
Fill the reserve tank to the MAX mark (A) with
Honda All Season Antifreeze/Coolant Tvpe 2
(P/N O1999-9001).
8. Pour Honda All Season Antifreeze/Coolant Type 2
into the radiator up to the base of the filler neck.
NOTE:
. Always use Honda All Season Antifreeze/Coolant
Type 2 {P/N 01999-9001). Using a non-Honda
c o o l a n t c a n r e s u l t i n c o r r o s i o n , c a u s i n g t h e
cooling system to malfunction or fail.
. Honda All Season Antifreeze/Coolant Type 2 is a
mixture of 50% antifreeze and 507o water. Pre-
m i x i n g i s n o t r e q u i r e d .
Engine Coolant Refill Capacity including the
reserve tank capacity of 0.53 4 (0.56 US gtl
:
5.0 0 (s.3 US qt)
I n s t a l l t h e r a d i a t o r c a p l o o s e l y .
Start the engine, and let it run until it warms up (the
radiator fan comes on at least twice).
Turn off the engine. Check the level in the radiator,
and add Honda All Season Antifreeze/Coolant Type
2 if needed.
P u t t h e r a d i a t o r c a p o n t i g h t l y , t h e n r u n t h e e n g i n e
a g a i n a n d c h e c k f o r l e a k s .
lnstall the splash shield (see step 22 on page 5-12).
1 0 .
1 1 .
L
t J .
10-7