Honda EP3 Service Manual page 1093

sRs
DTG Troubleshooting (cont'd)
1 1 .
Read the DTC.
ls DTC 2-3 ind icated?
YES Go to step 9.
NO-Short in the front passenger's airbag inflator;
replace the front passenger's airbag (see page 23-
1 1 4 ) . t
Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
Disconnect the driver's airbag 4P connector from
the cable reel {see step 2 on page 23-21).
Disconnect both seat belt tensioner 2P connectors
from the floor wire harness (see step 5 on page 23-
221.
9 .
1 0 .
23-44
T J
qJ
'12.
Disconnect SRS unit connector A (18P) from the
S R S u n it (see ste p 7 on page 23-22l. .
13. Disconnectthe special tool from dashboard wire
h a r n e s s B .
14. Check resistance between the No. 4 and No. 13
t e r m i n a l s a n d b e t w e e n t h e N o . 5 a n d N o . 1 4
t e r m i n a l s o f S R S u n i t c o n n e c t o r A ( 1 8 P ) . T h e r e
s h o u l d b e a n o p e n c i r c u i t , o r a t l e a s t 1 M Q .
SRS UNIT CONNECTOR A I18P)
BLU/RED
BLU/BLK
Wire side of female terminals
ls the resistance as specitied?
YES Faulty SRS unit; replace the SRS unit (see
page 23-122)'.a
N O - S h o n i n d a s h b o a r d w i r e h a r n e s s B ; r e p l a c e
d a s h b o a r d w i r e h a r n e s s B . l