Table of Contents
Advertisement
2.15
Trip Distance
You can select the distance data for the trip distance, from [Internal] or [External]. Al-
so, you can set the preset distance to display the trip distance.
1. Press the MENU/ESC key to open the menu.
2. Press
3. Press
selected [Internal], go to step 4. For [External], go to step 6.
[Internal]: Display the trip distance which is counted up based on the inner setting
of this equipment. See steps 4 and 5 for how to preset distance.
[External]: Display the trip distance using data from external equipment.
4. For [Internal], press
5. Set the preset distance. Press
digit and press the ENT key. The cursor moves to the next digit. Repeat this step
to set the value for ALL digits. To return the cursor to the upper digit, press the
MENU/ESC key.
Note: Be sure to enter ALL digits. Otherwise the setting is not saved.
To reset the trip distance, select [RESET] and press the ENT key.
6. Press the DISP key to close the menu.
or
key to select [Trip DIST] and press the ENT key.
Trip DIST options
or
key to select [Internal] or [External] then press the ENT key. If you
or
key to select [SET] and press the ENT key.
Internal options
SET setting window
or
key to set the value for the highest-order
2. MENU
2-27
- Quick Links:
- Wiring
Hide quick links:
Advertisement
Table of Contents
