Alarms; Xte Alarm; Anchor Watch Alarm - Furuno MFD12 Operator's Manual

2. Chart Plotter
2.10

Alarms

This section describes the alarms available with the chart plotter:

• XTE alarm

• Anchor watch alarm

• Proximity alarm
• Depth alarm
• Sea surface temperature alarm
• Sea surface temperature shear
• Speed alarm
• Trip log alarm
• Countdown timer
• Alarm clock
2.10.1 XTE Alarm
The XTE alarm tells you when your vessel is not on course by more than the set value.
When the XTE alarm is active, two dashed lines mark the XTE alarm boundaries, red
for starboard, green for port.
Intended
course
2.10.2 Anchor Watch Alarm
The anchor watch alarm tells you that your vessel has moved a distance greater than
the set value when the vessel must not be moving.
2-12
Own ship
position
Alarm
Alarm
setting
Your ship's position where
you start the anchor watch
alarm.
Destination
Alarm
waypoint
setting
: Alarm
area