Copy; Copying Procedure; Placing The Document - Xerox WorkCentre 5019 User Manual

Copy

Copying procedure

This section describes the basic copy procedures.

Placing the document

The following two methods are available to load documents:
Document feeder
• Single sheet
• Multiple sheets
Document glass
• Single sheet
• Bound documents, such as book
Note The document feeder is not available for some models. An optional component is required.
Contact your local Xerox representative.
Document feeder
Supported document sizes
You can place documents of the standard sizes in the document feeder.
When a document is placed in the document feeder, the machine detects the document size
automatically. The following standard size documents are detected automatically: A5
A3 , B5 , B5 , B4
16K , and 8K .
Note You can select one of the following alternative document sizes. For more information, refer
to System settings
• 8.5 × 13"
• 8.5 × 13"
• B5 or 16K
WorkCentre 5019/5021
User Guide
, 8.5 × 11" , 8.5 × 11"
on page 8-5.
or 8.5 × 13.4"
or 8.5 × 14"
, 8.5 × 13" , 8.5 × 14"
5
, A4 , A4 ,
, 11 × 17" , 16K ,
5-1