Cleaning The Machine; Cleaning The Exterior; Cleaning The Document Cover And Document Glass - Xerox WorkCentre 5019 User Manual

Cleaning the machine

This section describes how to clean the machine outer casing, document cover, document feeder, and
document glass.
WARNING: When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the machine. To avoid fire and
explosion never use aerosol cleaners.
WARNING: When cleaning this product, always switch off the power and unplug it. Access to a
live machine interior may cause electric shock.

Cleaning the exterior

CAUTIONS:
• Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on
the machine as they might discolor, deform, or crack the covers.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
1. Wipe the exterior with a firmly wrung soft cloth moistened with water.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove the dirt easily, gently wipe the machine with a soft cloth
moistened with a small amount of neutral detergent.
2. Wipe off any excess water with a soft cloth.

Cleaning the document cover and document glass

If the document cover and document glass become soiled, smudges may appear on copies, or scanned
documents and the machine may not properly detect document sizes.
WorkCentre 5019/5021
User Guide
Maintenance
10-9