To ensure clean copies at all times, clean the document presser and narrow glass strip about once a
month.
CAUTIONS:
•
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage the
paint or coating on plastic parts.
•
Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying or scanning.
1.
Wipe the document presser with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
•
Do not press the film with excessive force as it can be easily damaged.
•
Do not use cleaning agents other than water or neutral detergent.
•
If you cannot remove dirt easily, gently wipe the document presser with a soft cloth
moistened with a small amount of neutral detergent.
2.
Wipe the narrow glass strip with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft dry cloth.
Notes
•
Do not use cleaning agents other than water or neutral detergent.
•
If you cannot remove dirt easily, gently wipe the narrow glass strip with a soft cloth
moistened with a small amount of neutral detergent.
WorkCentre 5019/5021
User Guide
Maintenance
10-11