Setting The Paper Type - Xerox WorkCentre 5019 User Manual

Setting the paper type

This section describes how to set the type of paper loaded in tray.
The paper type is set to standard type as default. When loading a different type of paper into a tray,
change the paper type setting according to the type of paper loaded in the tray to keep the print
quality.
Refer to Supported paper type
1. Enter System Administration mode.
Refer to Entering System Administration mode
2. Press the program number of the tray that you want to confirm.
Program number
500
501
502
The current value is displayed.
3. Press the Size (Press 2sec) button to start changing the setting.
4. Enter the program number of the paper type that you want to set, and press the Start button.
Program number
0
2
5
WorkCentre 5019/5021
User Guide
on page 4-2.
on page 8-2.
Item
Tray 1
Tray 2
Bypass tray
Item
Normal
Heavyweight
Lightweight
Loading paper
4-15