Xerox WorkCentre 5019 User Manual page 66

Copy
Supported documents types (weights)
Documents with weights from 38 to 128 gsm (50 to 128 gsm for 2-sided documents) can be placed in
the document feeder and scanned.
The document feeder accepts the following number of sheets.
Document type (gsm)
Lightweight (38 to 49 gsm)
Plain (50 to 80 gsm)
Heavyweight (81 to 128 gsm)
(Bypass tray only)
Note To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-pasted
documents, curled paper, or carbon-backed paper. If you can flatten the curled document, you can
use it.
Follow the steps below to place documents in the document feeder.
You can place single or multiple sheet documents.
1. Remove any paper clips or staples from the document before placing it in the document feeder.
2. Place the document in the center of the document feeder, with the side to copy (or the front
surface of a 2 Sided document) facing up.
Note The document indicator lights up when a document is placed in the document feeder. If the
indicator is not lit, place the document again.
5-2
Lights up
Number of sheets
110 sheets
110 sheets
75 sheets
WorkCentre 5019/5021
User Guide