Xerox WorkCentre 5019 User Manual page 156

Problem solving
Error code Cause
n-1 A job is canceled due to out of
memory in reading.
n-2 A job is canceled.
Error code (XXX-XXX)
Error code Cause
004-345 An error occurred.
005-210 An error occurred.
005-275 An error occurred.
005-280 An error occurred.
005-500 An error occurred.
005-940 An error occurred in the document
feeder.
010-311 An error occurred.
010-312
010-320
010-327
010-392
11-26
Remedy
Change the setting, and then try
again.
Change the setting, and then try
again.
Remedy
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same error code is displayed
again, contact our Customer Support
Center.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same error code is displayed
again, contact our Customer Support
Center.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
When finished copying, proceed one
of the followings: press any button on
the control panel, execute new job, or
wait until the machine reaches the
time out to releases the error.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same error code is displayed
again, contact our Customer Support
Center.
WorkCentre 5019/5021
User Guide