Replacing The Toner Cartridge - Xerox WorkCentre 5019 User Manual

Replacing the toner cartridge

The following error codes and icons display in the machine status diagram when the remaining toner
level becomes low.
Error code Status machine diagram
-
J-1
*1
The remaining page yield for copy/print jobs is applicable when A4 paper LEF ( ) is used. The value
is an estimate and varies depending on the conditions such as the content printed, paper size, paper
type, and the machine operating environment.
Notes
• When you replace a toner cartridge, toner may spill and soil the floor. We recommend
laying paper on the floor beforehand.
• The use of toner cartridges not recommended by Xerox may degrade image quality and
performance. Use only toner cartridges recommended by Xerox.
• When the remaining amount of toner is low, the machine may stop printing and display
an error code. If this occurs, replace the toner cartridge to resume copying or printing.
• Leave the machine's power on when replacing the toner cartridge.
WorkCentre 5019/5021
User Guide
Required action
When the toner cartridge icon is lit
(blinks for three seconds), the toner
cartridge needs to be replaced after
Lights up
about 100 pages
toner cartridge ready.
When the error code appears, the toner
cartridge icon starts blinking, and the
error indicator is lit, the toner cartridge
needs to be replaced. Replace the toner
Blinks
cartridge.
Maintenance
*1
. Have a replacement
10-3