3-34
E N G I N E
Remove the O-ring
@.
Remove the switch contacts
@
and springs
@.
CRANKCASE
Remove the oil plate
a.
Remove the crankcase bolts and clamp
@.
NOTE:
Loosen the crankcase bolts diagonally and smaller sizes first.
Separate the crankcase into 2 parts, right and left with the
special tool.
09920-1 31 20: Crankcase separating tool
NOTE:
*
Fit the crankcase separating tool, so that the tool arms are in
parallel with the side of crankcase.
*
The crankshaft and transmission components should remain
in the left crankcase half.