Suzuki DL650 Service Manual page 68

E N G I N E 3-17
Install the clutch cable to the generator cover temporarily.
E l m
O h -
/ R -
e
Apply SUZUKl MOLY PASTE to the clutch release.
&
99000-251 40: SUZUKl MOLY PASTE
Assemble the clutch release so that the lever arm
@
will be
angle of 80 degree with axle
@.
Adjust the clutch cable play.
(W2-17)
NOTE:
After installing the clutch release, make sure that there is clear-
ance between the clutch cable end and the driveshaft end.