Precautions In Servicing; Electrical Parts - Suzuki DL650 Service Manual

4-2 FI SYSTEM DIAGNOSIS
PRECAUTIONS IN SERVICING
When handling the component parts or servicing the FI system,
observe the following points for the safety of the system.
ELECTRICAL PARTS
CONNECTOFUCOUPLER
When connecting a connector, be sure to push it in until a
click is felt.
With a lock type coupler, be sure to release the lock when dis-
connecting, and push it in fully till the works when connecting
it.
When disconnecting the coupler, be sure to hold the coupler
body and do not pull the lead wires.
lnspect each terminal on the connector/coupler for looseness
or bending.
lnspect each terminal for corrosion and contamination.
The terminals must be clean and free of any foreign material
which could impede proper terminal contact.
lnspect each lead wire circuit for poor connection by shaking it
by hand lightly. If any abnormal condition is found, repair or
replace.
When taking measurements at electrical connectors using a
tester probe, be sure to insert the probe from the wire harness
side (backside) of the connector/coupler.
O
Coupler
@
Probe