ENGINE 3-23
Remove the cylinder head gasket
a,
dowel pins
@
and cam
chain guide
a.
FRONT CYLINDER
Remove the cylinder nuts
@ I .
Remove the cylinder
@.
Remove the cylinder base gasket
8
and dowel pins
@.
NOTE:
Make sure that the oil jet is inserted in the crankcase.
FRONT PISTON
Place a clean rag over the cylinder base so as not to drop the
piston pin circlip into the crankcase.
Remove the piston pin circlip
O.
Remove the piston
@
by driving out the piston pin.
NOTE:
Scribe the cylinder number on the head of the piston.
REAR CAMSHAFTS
Rotate the generator 360 degrees
(1
turn) counterclockwise
and align the
"
I
F" line
@
on the generator rotor with the index
mark
@
of the valve timing inspection hole.