Suzuki DL650 Service Manual page 158

ENGINE 3-107
EXHAUST PlPE
Tighten the exhaust pipe bolts
@
to the specified torque.
Exhaust pipe bolt: 23 N m (2.3 kgf-m, 16.5 Ib-ft)
p m E q
Use the new gasket to prevent exhaust gas leakage.
WATER UNION
Install the O-ring to the water union.
I
Replace the O-ring with a new one.
I
When installing the water union, apply engine coolant to the
O-ring.
ENGINE COOLANT
INTAKE PlPE
Apply SUZUKl SUPER GREASE to the O-ring.
99000-25030: SUZUKl SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
pE6i-1
Use the new O-ring to prevent air from sucking
through the joint.
Make sure that the " U P mark
@
faces upward.
Install the intake pipes.
NOTE:
The intake pipe can be identified by the mark
@.
F: Front cylinder head intake pipe
R: Rear cylinder head intake pipe