ELECTRICAL SYSTEM 8-1 I
REGULATOR/RECTIFIER
Remove the right cowling.
( - 7 - 5 )
Disconnect the regulatorlrectifier couplers
0.
Remove the regulatorlrectifier
0.
Measure the voltage between the terminals using the multi cir-
cuit tester as indicated in the table below. If the voltage is not
within the specified value, replace the regulatorlrectifier with a
new one.
09900-25008: Multi circuit tester set
f i j )
Tester knob indication: Diode test (fe)
Unit: V
-~
1.4 V and more (tester's battery voltage)
NOTE:
If the tester reads 1.4 V and below when the tester probes are not
connected, replace its battery.