Suzuki DL650 Service Manual page 157

3-106 ENGINE
CYLINDER HEAD COVER
Pour engine oil in each oil pocket in the front and rear cylinder
heads.
NOTE:
Be sure to check the valve clearance. ( W 2 - 8 )
lnstall the dowel pins
@
and O-rings
@.
Install the new gaskets to each cylinder head cover.
Apply SUZUKI BOND to the cam end caps of the gaskets.
a
991 04-31 140: SUZUKI BOND "1 2078" (USA)
a
99000-31 110: SUZUKI BOND "1 215" (Others)
pmim
Use the new gaskets to prevent oil leakage.
The cylinder head covers can be distinguished by the
embossed letters
@.
"F": Front cylinder head cover
"R": Rear cylinder head cover
Install the cylinder head covers on each cylinder head.
Fit the gaskets
@, @
to each head cover bolt.
piEim
Use the new gaskets to prevent oil leakage.
I
NOTE:
The metal side of the gasket
@
must face to the bolt flange.
After applying engine oil to the gaskets tighten the head cover
bolts to the specified torque.
Head cover bolt: 14 N-m (1.4 kgf-m, 10.0 Ib-ft)