Suzuki DL650 Service Manual page 313

7-42 CHASSI S
DUST SEAL
Install the new dust seals with the special tool.
09913-70210: Bearing installer set (@
Q
62)
(O Q
47)
NOTE:
When installing the dust seals, the stamped mark of dust seal
must face the special tool.
Apply SUZUKl SUPER GREASE to the dust seal lips before
assembling rear wheel.
99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-2501 0: SUZUKI SUPER GREASE "A" (Others)
BRAKE DISC
Make sure that the brake disc is clean and free of any greasy
matter.
NOTE:
The stamped mark
@
on the brake disc should face to the out-
side.
Apply THREAD LOCK to the disc bolts and tighten them to
the specified torque.
a
99000-321 30: THREAD LOCK SUPER "1 360"
P]
Brake disc bolt: 23 Nmm (2.3 kgf-m, 16.5 Ib-ft)
REAR SPROCKET
Install the rear sprocket to the rear sprocket mounting drum.
NOTE:
Stamped mark
@
on the sprocket must face outside.
Apply SUZUKl SUPER GREASE to the rear sprocket mount-
ing retainer.
Install the rear sprocket mounting drum retainer
@
as shown.
Apply SUZUKl SUPER GREASE to the contacting surface
between the rear wheel and the sprocket drum.
99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)