Suzuki DL650 Service Manual page 64

ENGI N E 3-13
Put the drive chain on the driveshaft.
Gradually raise the engine assembly and align all the bolt
holes.
Install the engine mounting bolts and tighten them tempo-
rarily.
Tighten the engine mounting thrust adjusters to the specified
torque.
rn
Engine mounting thrust adjuster:
12 N-m (1.2 kgf-m, 8.5 Ib-ft)
Tighten the engine mounting thrust adjuster lock-nuts to the
specified torque with the special tool.
09940-14990: Engine mounting thrust adjuster socket
-
wrench
rn
Engine mounting thrust adjuster lock-nut:
45 N-m (4.5 kgf-m, 32.5 Ib-ft)
After tightening the
bolt
@.
rn
Engine mounting
Engine mounting
engine mounting bolt, tighten the pinch
bolt: 55 N-m (5.5 kgf-m, 40.0 Ib-ft)
pinch bolt
@:
25 N-m (2.5 kgf-m, 18.0 lb-ft)
-
Tighten the engine mounting nuts to the specified torque.
rn
Engine mounting nut
@:
93 N-m (9.3 kgf-m, 67.5 Ib-ft)
Engine mounting nut: 55 N-m (5.5 kgf-m, 40.0 Ib-ft)