Suzuki DL650 Service Manual page 235

FUEL SYSTEM AND THROTTLE BODY 5-25
NOTE:
Make sure the throttle valve open or close smoothly.
Align the boss
@
of the STP sensor with the groove
@
of the
ST valve shaft.
Install the STP sensor.
Tighten the STP sensor mounting screws.
a
09930-1 1960: Torx wrench
STP sensor mounting screw:
2.0 N-m (0.2 kgf-m, 1.5 Ib-ft)
NOTE:
Make sure the ST valve open or close smoothly.
Apply thin coat of the engine oil to the new fuel injector cush-
ion seal
@,
and install it to the fuel injector.
I
Replace the cushion seal and O-ring with a new one.
1
Install the O-ring
0 3
to the fuel injector.
Apply thin coat of the engine oil to the new O-ring @ I .